초록
본 논문에서는 벅-부스트 형태에 기초한 전류형 PWM 인버터를 제안하고, 이를 태양광과 계통 연계를 위한 인터페이스 회로로서의 타당성을 검증하였다. 제안하는 회로는 다섯 개의 스위칭 소자를 가지게 되는데, 이 중 단 하나의 스위치만이 쵸핑 동작을 수행하게 되고, 나머지 스위치들은 출력단의 정·부 방향을 결정짓는데 이용된다. 따라서, 스위칭에 의한 손실을 상당히 저감시킬 수 있고, 입력단의 인덕터 전류를 전류 불연속 모드로 동작시켜 별도의 입력 전류의 검출이 없이도 출력단을 단위 역률화 할 수 있는 장점을 가진다. 제안하는 계통 연계형 인버터에 대한 동작을 이론적으로 분석하고 DSP TMS320F241을 이용한 150[W]급 시작품의 실험 결과로부터 제안하는 인버터의 타당성을 검증하였다.
This paper presents a current-source-inverter based on a buck-boost configuration md its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller. So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150[W] prototype equipped with digital signal processor TMS320F241.