DOI QR코드

DOI QR Code

고무 몰드를 이용한 금속 분말의 온간 등가압 성형

Warm Isostatic Pressing of Metal Powder by a Rubber Mould

  • Yang, Hun-Cheol (Dept. of Mechanical Engineering, Graduate School of Pohang University of Science and Technology) ;
  • Lee, Ji-Wan (Dept. of Mechanical Engineering, Graduate School of Pohang University of Science and Technology) ;
  • Kim, Gi-Tae
  • 발행 : 2002.09.01

초록

The effect of a rubber mould on densification and deformation of aluminum alloy powder was investigated during warm isostatic pressing. The hyperelastic constitutive equations based on various strain energy potentials were employed to analyze deformation of rubber. The parameters in the strain energy potentials were obtained from experimental data for uniaxial and volumetric compression of Viton rubber at two warm temperatures. For elastoplastic response, the yield function of Shima and Oyane was implemented into a finite element program (ABAQUS) to predict compaction responses of metal powder during warm isostatic pressing. Finite element results were compared with experimental data for densification and deformation of aluminum alloy powder with/without a rubber mould under warm die pressing.

키워드

참고문헌

  1. Froes, F. H. and Eylon, D., 1990, 'Powder Metallurgy of Titanium Alloys,' Int. Mater. Reviews, Vol. 35, No.3, pp. 162-182 https://doi.org/10.1179/095066090790323984
  2. Wojciechowski, S., 2000, 'New Trends in the Development of Mechanical Engineering Materials,' J. Mat. Process. Tech., Vol. 106, pp. 230-235 https://doi.org/10.1016/S0924-0136(00)00619-1
  3. James, P. J., 1983, Isostatic Pressing Technology, Applied Sci. Publishers, London, pp. 1-250
  4. Sagawa, M., Nagata, H., Watanabe, T. and Itatani, O., 2000, 'Rubber Isostatic Pressing (RIP) of Powder for Magnets and Other Materials,' Materials and Design, Vol. 21, pp. 243-249 https://doi.org/10.1016/S0261-3069(99)00084-9
  5. ABAQUS User's I, II and III Manual, 2001, Ver. 6.2, H.D. Hibbitt, I. Karlsson and E.P. Sorenson, USA
  6. Gadala, M. S., 1991, 'Unified Numerical Treatment of Hyperelastic and Rubber-like Constitutive Laws,' Communications in Applied Numerical Methods, Vol. 7, pp. 581-587 https://doi.org/10.1002/cnm.1630070803
  7. Koga, S., Hamanaka, J., Nakatsuka, M., Sugita, T. and Sugiyama, S., 1992, 'Mechanical Behavior of the Ceramic Granule Compact in Cold Isostatic Pressing,' JSME, Int. J. Series I, Vol. 35, pp. 470-474
  8. Shima, S. and Oyane, M., 1976, 'Plasticity Theory for Porous Metals,' Int. J. Mech. Sci., Vol. 18, pp. 285-291 https://doi.org/10.1016/0020-7403(76)90030-8
  9. Henderson, R. J., Chandler, H. W., Akisanya, A. R., Barber, H., and Moriarty, B., 2000, 'Finite Element Modelling of Cold Isostatic Pressing,' J. Euro. Ceram. Soc., Vol. 20, pp. 1121-1128 https://doi.org/10.1016/S0955-2219(99)00280-0
  10. Henderson, R. J., Chandler, H. W., Akisanya, A. R., and Moriarty, B., 2000, 'Bag Design in Isostatic Pressing,' Materials and Design, Vol. 21, pp. 259-262 https://doi.org/10.1016/S0261-3069(99)00076-X
  11. Lee, S. C. and Kim K. T., 2001, 'Densification Behavior of Aluminum Alloy Powder under Cold Compaction,' Int. J. Mech. Sci., submitted https://doi.org/10.1016/S0020-7403(02)00054-1
  12. Hatch, J. E., 1995, Aluminum Properties and Physical Metallurgy, American Society for Metals, Metals Park, Ohio, pp. 684-687
  13. Heller, M., Legare, J., Wang, S. H. and Fukuhara, S., 1999, 'Thermal Stability and Sealing Performance of Perfluoroelastomer Seals as a Function of Crosslinking Chemistry,' J. Vacuum Sci. and Tech., Vol. 17. No.4, pp. 2119-2124 https://doi.org/10.1116/1.581736
  14. Yang, H. C., and Kim, K. T., 2000, 'Densification Behavior of Ti-6AI-4V Powder Compacts by Hot Isostatic Pressing,' Transactions of the KSME, A24, No.2, pp. 394-402
  15. Kim, J. H., Han, D. B. and Kim, K. T., 1996, 'High Temperature Creep Behavior of $Cr_3C_2$ Ceramic Composite,' Mat. Sci. Eng. A, A212, pp. 87-93
  16. Kim, K. T., Yang, H. C. and Hong, S. T., 2001, 'Densification Behaviour of Titanium Alloy Powder Compacts at High Temperature,' Powder Metallurgy, Vol. 44, No. 1, pp. 34-40 https://doi.org/10.1179/003258901666149
  17. Kim, K. T. and Yang, H. C, 2001, 'Densification Behaviour of Titanium Alloy Powder during Hot Pressing, ' Mat. Sci. Eng. A, A313, pp. 46-52
  18. Persson, B. N. J., 1998, 'On the Theory of Rubber Friction,' Surface Science, Vol. 401, pp. 445-454 https://doi.org/10.1016/S0039-6028(98)00051-X
  19. Han, H. N., Lee, Y. G., Oh, K. H. and Lee, D. N., 1996, 'Analysis of Hot Forging of Porous Metals,' Mat. Sci. Eng. A, A206, pp. 81-89
  20. Altan, T., Oh, S. I. And Gegel, H. L., 1983, Metal Forming: Fundamentals and Application, American Society for Metals, Metals Park, Ohio, pp. 1-353
  21. Kim, K. T. and Yang, H. C, 2001, 'Densification Behaviour of Titanium Alloy Powder under Hot Isostatic Pressing,' Powder Metallurgy, Vol. 44, No. 1, pp.41-47 https://doi.org/10.1179/003258901666158