대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권9호
  • /
  • Pages.1787-1794
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

TiNi/A16061 형상기억복합재료의 미시적 손상거동과 손상위치측정에 관한 연구

A Study on the Microscopic Damage Behavior and the Damage Position Evaluation of TiNi/Al6061 Share Memory Alloy Composite

  • 발행 : 2002.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

TiNi alloy fiber was used to solve the problem of the tensile residual stress as the reinforced material. TiNi alloy fiber improves the tensile strength of composite by occurring compressive residual stress in the matrix using shape memory effect. In order to generate compressive residual stress in TiNi/Al6061 shape memory alloy(SMA) composite, 1, 3 and 5% pre-strains were applied to the composite in advance. It was also evaluated the effect of compressive residual stress corresponding to the pre-strain variation and the volume fraction of TiNi alloy. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain in TiNi/Al6061 SMA composite. The results of the microscopic damage evaluation of TiNi/Al6061 SMA composite under various pre-strain using AE technique can be divided into three stage corresponding to the AE signals. AE counts and events were useful parameters to evaluate the fracture mechanism according to the variation of pre-strain. In addition, two dimensional AE source location technique was applied for monitoring the crack initiation and propagation in composite.

키워드

참고문헌

  1. Park, B.G., Crosky, A.G. and Hellier, A.K., 2001, 'Material Characterization and Mechanical Properties of Al2O3-Al Metal Matrix Composites,' J. of Materials Science, Vol. 36, No. 10, pp. 2417-2426 https://doi.org/10.1023/A:1017921813503
  2. Oguocha, I.N.A., Radjabi, M. and Yannacopoulos, S., 2000, 'The Effect of Cooling Rate on the Quench Sensitivity of 2618 AI/AI2O3 MMC,' J of Materials Science, Vol. 35, No. 22, pp. 5629-5634 https://doi.org/10.1023/A:1004881702823
  3. Kim, Y.I., Chun, W.C., Baek, B.J., Kim, J.T., and Pak, B.C., 1998, 'Forced Air Cooling by Using Manifold Microchannel Heat Sinks,' KSME International Journal, Vol. 12, No.3, pp. 709-718 https://doi.org/10.1007/BF02945732
  4. Kashiwagura, N., Ohsawa, Y., Iwata, S., Jin, J.-Y., and Kamioka, H., 2000, 'Ultrasonic Behavior of Ti0.49-Ni0.51 Shape Memory Alloy between $0^{\circ}C$ and $90^{\circ}C$,' Japanese Journal of Applied Physics Part l-Regular Papers Short Notes & Review Papers, Vol. 39, No. 5B, pp. 2928-2932 https://doi.org/10.1143/JJAP.39.2928
  5. Kim, H.G., 2001, 'Evaluation of Elastic Modulus in a Particulate Reinforced Composite by Shape Memory Effect,' Transactions of the KSME, A, Vol. 25, No. 1, pp. 25-31
  6. Liu, M., Zhang, X.M., Liu, L., Li, Y.Y. and Shelyakov, A.V., 2000, 'In Situ TEM Observations of Martensite-Austenite Transformations in a Ni49Ti36Hfl5 High Temperature Shape Memory Alloy,' J. of Materials Science Letters, Vol. 19, No. 15, pp. 1383-1386 https://doi.org/10.1023/A:1006717619342
  7. Goo, B.C., 1998, 'Modeling of the Mechanical Behavior of a Shape-memory Alloy by a Micro-Mechanical Approach,' Transactions of the KSME, A, Vol. 22, No. 6, pp. 1063-1072
  8. Lee, J.K., Lee, J.H., Choi, H.S. and Lee, M.R., 2000, 'AE Characteristics on Microscopic Failure Behavior of Carbon/Epoxy Composite Prepared by Cocure and Precure Process,' Transactions of the KSME, A, Vol. 24, No. 10, pp. 2520-2528
  9. Enoki, M.., Ohtake, S. and Kishi, T., 2001, 'Classification of Micro-Fracture Process Type in Glass Matrix Composites by Quantitative Acoustic Emission Method,' Materials Transactions, Vol. 42, No. 1, pp. 108-113 https://doi.org/10.2320/matertrans.42.108
  10. Fregonese, M., Idrissi, H., Mazille, H., Renaud, L. and Cetre, Y., 2001, 'Monitoring Pitting Corrosion of AISI 316L Austenitic Stainless Steel by Acoustic Emission Technique: Choice of Representative Acoustic Parameters,' J. of Materials Science, Vol. 36 No.3, pp. 557-563 https://doi.org/10.1023/A:1004891514836
  11. Jhang, K.Y., Kim, D.J. and Lee, W.H., 1998, 'AE Source On-line Localization on Material with Unkown Acoustic Wave Propagation Velocity,' Transactions of the KSME, A, Vol. 22, No.3, pp. 688-694
  12. Li, Z.J., Li, F.M., Li, X.S. and Yang, W.L., 2000, 'P-Wave Arrival Determination and AE Characterization of Concrete,' J. of Engineering Mechanics-ASCE, Vol. 126, No.2, pp. 194-200 https://doi.org/10.1061/(ASCE)0733-9399(2000)126:2(194)
  13. Yano, T., Budiyanto, K, Yoshida, K and Iseki, T., 1998, 'Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Composite by Hot-Pressing,' Fusion Engineering & Design, Vol. 41, pp. 157-163 https://doi.org/10.1016/S0920-3796(98)00094-5