Journal of Welding and Joining

  • 제20권4호
  • /
  • Pages.505-509
  • /
  • 2002
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지

Sn-Ag-Bi-In계 BGA볼의 솔더링 특성 연구

A Study on the Soldering Characteristics of Sn-Ag-Bi-In Ball in BGA

  • 문준권 (서울시립대학교 공과대학 재료공학과) ;
  • 김문일 (서울시립대학교 공과대학 재료공학과) ;
  • 정재필 (서울시립대학교 공과대학 재료공학과)
  • 발행 : 2002.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Pb is considered to be eliminated from solder, due to its toxicity. However, melting temperatures of most Pb-free solders are known higher than that of Sn37Pb. Therefore, there is a difficulty to apply Pb-free solders to electronic industry. Since Sn3Ag8Bi5In has relatively lower melting range as $188~200^{\circ}C$, on this study. Wettability and soldering characteristics of Sn3Ag8Bi5In solder in BGA were investigated to solve for what kind of problem. Zero cross time, wetting time, and equilibrium force of Sn3Ag8Bi5In solder for Cu and plated Cu such as Sn, Ni, and Au/Ni-plated on Cu were estimated. Plated Sn on Cu showed best wettability for zero cross time, wetting time and equilibrium farce. Shear strength of the reflowed joint with Sn3Ag8Bi5In ball in BGA was investigated. Diameter of the ball was 0.5mm, UBM(under bump metallurgy) was $Au(0.5\mu\textrm{m})Ni(5\mu\textrm{m})/Cu(18\mu\textrm{m})$ and flux was RMA type. For the reflow soldering, the peak reflow temperature was changed in the range of $220~250^{\circ}C$, and conveyor speed was 0.6m/min.. The shear strength of Sn3Ag8Bi5In ball showed similar level as those of Sn37Pb. The soldered balls are aged at $110^{\circ}C$ for 36days and their shear strengths were evaluated. The shear strength of Sn3Ag8Bi5In ball was increased from 480gf to 580gf by aging for 5 days.

키워드

참고문헌

  1. 무연 마이크로 솔더링 정재필;신영의;임승수
  2. IEEE spectrum v.35 no.5 Get the lead out ! B. Trumble https://doi.org/10.1109/6.669978
  3. Journal of KWS v.19 no.1 Research Trends of Sn-Ag Based Pb-Free Solders Moon Il Kim;Kyu Sik Shin;Jae Phi Jung
  4. Soldering & Surface Mount Technology no.4 Quantitative Solderability Measurement of Electronic Components Part 2: An Index of Solderability C. Lea;W.A. Dench
  5. Journal of Electronic Materials v.28 no.11 Effect of Ni layer thickness and soldering time on intermetallic compound formation at the interface between molten Sn-3.5wt%Ag and Ni/Cu substrate Won Kyoung Choi;Hyuck Mo Lee https://doi.org/10.1007/s11664-999-0164-1
  6. JEM v.30 no.5 Wetting Reaction of Sn-Ag Based Solder Systems on Cu Substrates Plated with Au and/or Pb Layer C.Y. Liu;Jian Li;G.J. Vandentop;W.J. Choi;K.N. Tu https://doi.org/10.1007/s11664-001-0092-1
  7. Proceedings of 2001 Electronic Components and Technology Conference Microstructure, Joint Strength and Failure Mechanism of Sn-Ag, Sn-Ag-Cu versus Sn-Pb-Ag Solders in BGA Packages Ka Yau Lee;Ming Li;Dennis R. Olsen;William T. Chen;Ben T.C. Tan;Subodh Mhaisalkar
  8. Proceedings of 2001 International Symposium on Advanced Packaging Materials Shear Property and Microstructure Evaluation of Pb-free Solder Bumps under Room Temperature and Multiple Reflew/High Temperature Aging Li;Jin-Wook Jang;Becky Allmen
  9. JEM v.29 no.10 Long-Term Aging Study on the Solid-State Reaction Between 58Bi42Sn Solder and Ni Substrate C. Chen;C.E. Ho;A.H. Lin;C.R. Kao https://doi.org/10.1007/s11664-000-0013-8
  10. 무연 마이크로 솔더링 정재필;신영의;임승수