참고문헌
- Selection of Temperature Control Methods Suitable for Lathes and Machining Centers with Different Thermal Characteristics v.53 no.4 Study on Temperature Control of Machine Tools(4th Report) Junji Chigira;Yoshiaki Kakino
- Rapid Stabilization of a Machine Tool before Working v.41 no.6 Control of the Thermal Deformation of a Machine Tool(1st Report) Toshio Sata;Yoshimi Takeuchi
- Control on Varying Heat source v.41 no.11 Control of the Thermal Deformation of a Machine Tool(2nd Report) Yoshimi Takeuchi;Nobuyuki Okubo;Toshio Sata
- Effects of the Circulation of Fluids v.39 no.2 Thermal Deformation of Machine Tools(3st Report) Keiji Okushima;Yoshiaki Kakino
- In Case of Constant Preload v.50 no.4 A Study of Thermal Expansion of Ball Screw Jiro Otsuka;Shigeo Fukada
- Thermal Deformation of Colum in Steady state v.38 no.3 Thermal Deformation of Machine Tools(1st Report) Keiji Okushima;Yoshiaki Kakino
- NC Machine Tools JSPE v.54 no.9 A Study of Compensation of Thermal Dispiacement of the Ballscrew Yoshiaki Kakino;Kazuaki Mori
- Automatic Compensation Using an NC Controller Marketed v.57 no.6 A Method of Thermal Displacement Compensation for Machining Center by Temperatures Measured on the Machine(2nd Report) Mitsuyasu Matsuo;Takeshi Yasui
- NSK Technical Journal no.650 Influence of Ball screws and Slide ways on Positioning Accuracy Yamaguchi
- FANUC series O-Mate for Lathe Operator's Manual
- 한국공작기계학회지 v.8 CNC 선반에서 볼나사 열변형에 따른 위치결정 정도 개선에 관한 연구 홍성오;조규재;김재열