참고문헌
- B. Bhushan, Tribology and Mechanics of Magnetic Storage Devices, Springerverlag New York Inc, 1991
- Y. Lee, K. Chun, J. Lee, 'Polysilicon Surface Modification Technique to Reduce Sticking of Microstructure,' The 8th International Conference on Solid-State Sensors and Actuators and Eurosensors IX, Stockholm, Sweden, pp. 206-209, 1995 https://doi.org/10.1109/SENSOR.1995.717142
- K. Deng, W. H. Ko, 'Static Friction Coefficient of DLC Films in MEMS,' Sensors and Actuators, Vol. 35, pp. 45-50, 1992 https://doi.org/10.1016/0924-4247(92)87006-3
- Y. Matsumoto, T. Shimada, M. Ishida, 'Novel Prevention Method of Stiction Using Silicon Anodization for SOI Structure,' Sensors and Actuators, Vol. 72, pp. 153-159, 1999 https://doi.org/10.1016/S0924-4247(98)00229-5
- 한동국, 김대은, '대기압 저감에 따른 헤드/디스크 인터페이스의 트라이볼로지 특성 분석,' 추계윤활학회논문집, pp. 303-309, 1999
- 차금환, 김대은, '코팅된 실리콘웨이퍼의 미소 마찰마멸특성에 관한 연구,' 한국윤활학회지, Vol. 15, pp. 29-38, 1999
- W. Wang, X. Liu, 'Investigation of KOH Anisotropic Etching of Si<100> Wafers for Improving Etched Surface Quality,' IEEE, pp. 127-130, 1998 https://doi.org/10.1109/ICSICT.1998.785819
- R. Divan, H. Camon, 'Limiting Roughness in Anisotropic Etching,' IEEE, pp. 553-556, 1997 https://doi.org/10.1109/SMICND.1997.651316
- C. J. Kim, J. Y. KIm, B. Sridharan, 'Comparative Evaluation of Drying Techniques for Surface Micromachining,' Sensors and Actuators A, Vol. 64, pp. 17-26, 1998 https://doi.org/10.1016/S0924-4247(98)80053-8
- N. Tas, T. Sonnenberg, H. Jansen, R. Legetnberg and M. Elwenspoek, 'Stiction in Surface Micromaching,' Journal of MEMS, Vol. 6, pp. 385-397, 1996 https://doi.org/10.1088/0960-1317/6/4/005
- U. Sirinivasan, M. R. Houston and R. T. Howe, 'Alkyltrichlorosilane-Based Self-Assembled Monolayer Films for Stiction Reduction in Silicon Micromachines,' Journal of MEMS, Vol. 7, pp. 252-260, 1998 https://doi.org/10.1109/84.679393
- G. Gao, X. Tian, B. Bhushan, 'A meniscus Model for Optimization of Texturing and Liquid Lubrication of Magnetic Thin-Film Rigid Disks,' Tribology Transactions, Vol. 38, No. 2, pp. 201-212, 1995 https://doi.org/10.1080/10402009508983397