대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권5호
  • /
  • Pages.881-889
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

연속압입 시험기법을 이용한 석유화학설비 경년손상의 새로운 평가변수 고찰

Determination of New Parameter for Materials Degradation Using Continuous Indentation Testing Technique

  • 장재일 ((주)프론틱스 부설연구소) ;
  • 최열 ((주)프론틱스 부설연구소) ;
  • 손동일 ((주)프론틱스 부설연구소) ;
  • 이윤희 (서울대학교 재료공학부) ;
  • 권동일 (서울대학교 재료공학부) ;
  • 김정태 (두산중공업 기술연구원)
  • 발행 : 2002.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Newly developed continuous indentation technique has made nondestructive assessment of tensile properties possible. The present study was undertaken to determine new parameters for indicating time-dependent material degradation of petro-chemical plant. Continuous indentation tests were performed for Cr-Ni steel and Cr-Mo steel which are widely used as facilities of petro-chemical plant. From the results, it was found that yield strength and tensile strength cannot be used as general degradation parameters because the changes in the strengths with aging time didn't show any tendency. On the other hand, work hardening exponent and yield ratio showed consistent tendency with increasing aging time. Therefore, nam attention of this work was paid on them as new degradation parameters, and the in-field applicability of the parameters was evaluated and discussed.

키워드

참고문헌

  1. British Standars 7706, 1993, 'Calibration and Setting-Up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for the Detection, Location and Sizing of Flaws, British Standards Institution
  2. Haggag, F. M., Nanstad, R. K., Hutton, J. T., Thomas, D. L., and Swain, R. L., 1990, 'Use of Automated Ball Indentation Testing to Measure Flow Properties and Estimate Fracture Toughness in Metallic Materials,' ASTM STP 1092, pp. 188-208
  3. 변택상, 김진원, 홍준화, 1997, '압입시험을 이용한 원자로압력용기강의 파괴인성 예측 모델,' 제 11회 재료강도 심포지엄 논문집, 한국과학기술회관, 서울, pp. 467-473
  4. 안정훈, 최열, 권동일, 2000, '압입하중-변위곡선의 해석을 통한 재료의 소성유동특성 평가,' 대한금속재료학회지, Vol. 38, No. 12, pp. 1606-1611
  5. 장재일, 최열, 권동일, 박주승, 2001, '비파괴적 인장물성 평가를 위한 Advanced Indentation System의 응용 연구,' 2001년도 대한 기계학회 제1차 재료 및 파괴부문 학술대회 논문집, 한국기계연구원, 대전, pp. 58-66
  6. Francis, H.A., 1976, 'Phenomenological Analysis of Plastic Spherical Indentation,' J. Eng. Mater. Technol. Trans. ASME, Vol. 98, pp. 272-286 https://doi.org/10.1115/1.3443378
  7. Doerner, M.F. and Nix, W.D., 1986, 'A Method for Interpreting the Data from Depth-sensing Indentation Instruments,' J. Mater. Res., Vol. 1, No. 4, pp. 601-607 https://doi.org/10.1557/JMR.1986.0601
  8. Oliver, W.C. and Pharr, G.M., 1992, 'An Improved Technique for Determination Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments,' J. Mater. Res., Vol. 7, No. 6, pp. 1564-1583 https://doi.org/10.1557/JMR.1992.1564
  9. Norbury, A.L. and Samuel, T., 1928, 'The Recovery and Sinking-in or Piling-up of Material in the Brinell Test, and the Effects of These Factors on the Correlation of the Brinell with Certain Other Hardness Tests,' J. Iron Steel Inst., Vol. 117, pp. 673-687
  10. Kimura, K., Matsuo, T., Kikuchi, M. and Tanaka, R., 1986, 'The Effect of Stress on Degradation of 1Cr-1Mo-1/4V Steel at Elevated Temperature,' Tetsu-to-Hagane, Vol. 72, pp. 474-481 https://doi.org/10.2355/tetsutohagane1955.72.3_474
  11. Shoji, T. (ed.), 1994, Time-dependent Degradation and Life-time Prediction, Realize Inc, Japan, pp. 37-48
  12. Shoji, T. (ed.), 1994, Time-dependent Degradation and Life-time Prediction, Realize Inc., Japan, pp. 118-124
  13. Kondo, Y., Sakurai, Y., Namekata, J., Tanaka, M., and Hangai, F., 1990, 'Effect of High Temperature Aging on Eutectic Carbide Morphology of Centrifugally Cast HK40 and HP Steel,' Tetsu-to-Hagane, Vol. 76, No. 7, pp. 1195-1201 https://doi.org/10.2355/tetsutohagane1955.76.7_1195
  14. Yamasaki, D, Hirata, I, Morimoto, T, and Ono, K, 1979, 'The Characteristics of Sigma Phases Predicted in HK40-Alloy,' Tetsu-to-Hagane, Vol. 65, No. 7, pp. 969-974 https://doi.org/10.2355/tetsutohagane1955.65.7_969
  15. Toyoda, M., 1989, 'Significance of Tensile Deformation Properties of Steels for Framed Structures,' J. Jpn. Weld. Soc., Vol. 58, No. 7, pp. 485-490