Effect of kurtosis on the Flow Factors Using Average Flow Model

  • Cho, Yong-Joo (School of Mechanical Engineering, Pusan National University) ;
  • Kim, Tae-Wan (Research Institute of Mechanical Technology, Pusan National University) ;
  • Koo, Young-Pil (School fo Mechanical Engineering, Pukyong National University)
  • Published : 2002.06.01

Abstract

The roughness effects are very important due to the presence of interacting asperities in mixed lubrication regime. An average Reynolds equation using flow factors is useful to determine the effects of surface roughness on mixed lubrication. In this study, the effect of kurtosis on flow factors is investigated using random rough surfaces generated numerically, The results show that flow factors are very sensitive to h/$\sigma$ according to the value of kurtosis in the partial lubrication regime.

Keywords

References

  1. Tzeng, S. T. and Saibel, Surface Roughness Effect on Slider Bearing Lubrication, ASLE, Trans, Vol. 10, pp. 334, 1967 https://doi.org/10.1080/05698196708972191
  2. Patir, N. and Cheng, H. S., An average Flow Model for Determining Effects of Three-Dimensional Roughness on Patial hydrodynamic Lubrication, ASME, J. Lubri. Tech. Vol. 100, pp. 12-17, 1978 https://doi.org/10.1115/1.3453103
  3. Patir, N. and Cheng, H. S., Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces, ASME, J. Lubri. Tech. Vol. 101, pp. 220-230, 1979 https://doi.org/10.1115/1.3453329
  4. Teal, J. L. and Lebeck, A. 0., An Evaluation of the Average Flow Model for Surface Roughness Effects in Lubrication, ASME, Journal of Tribology, Vol. 102, pp. 360-367, 1980
  5. Lunde, L. and Tonder, K., Pressure and Shear Flow in a Rough Hydrodynamic Bearing, Flow Factor Calculation, ASME, Joumal of Tribology, Vol. 119, pp. 549-555, 1997 https://doi.org/10.1115/1.2833536
  6. Patir, N., Effects of Surface Roughness on Partial Film Lubrication Using an Average Plow Model Based on Numerical Simulation, PhD thesis, Nonhwestem University, Evanston, Ill., 1978
  7. Hamrock, B. J., Fundamentals of Fluid Film Lubrication, McGRAW-HILL, 1994
  8. Nayak, P. R., Random Pressure Model of Rough Surfaces, ASME, Joumal of Lubhcation Technology, Vol. 93, pp.398-407, 1971 https://doi.org/10.1115/1.3451608
  9. Patir, N., A Numerical Procedure for Random Generation of Rough Surfaces, Wear, Vol. 47, pp.263-277, 1978 https://doi.org/10.1016/0043-1648(78)90157-6
  10. Hu, Y. Z. and Tonder, K., Simulation of 3-D Random Rough Surface by 2-D Digital Filter and Fourier Analysis, Int. J. Mach. Tools Manufact., Vol. 32, No. 1/2, pp. 83-90, 1992 https://doi.org/10.1016/0890-6955(92)90064-N