한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제19권6호
  • /
  • Pages.15-22
  • /
  • 2002
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

디지털 기계제작과 가상 공작기계

Digital Manufacturing and Virtual Machine Tool

  • Ko, Tae-Jo (Dept.of Mechanical Engineering, Yeungnam University) ;
  • Baek, Dae-Kyun (Visiting scholar, Lousiana State University) ;
  • Kim, Hee-Sool (Dept.of Mechanical Engineering, Yeungnam University)
  • 발행 : 2002.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. Proving its worth: Digital Manufacturing's ROI, D. H. Brown Associates, Inc. 1999
  2. Jerard, R. B., Drysdale, R. L., Hauck, K., 'Geometric Simulation of Numerically Control Machining,' Proc. ASME Int. Computer in Engineering Conf., ASME, New York, pp. 129-136, 1988
  3. Oliver, J. H., 'Efficient Intersection of Surface Normals with Milling Tool Swept Volumes for Discrete Three-Axis NC Verification,' Journal of Machanical Design, Vol. 114, pp. 283-287, 1992 https://doi.org/10.1115/1.2916944
  4. Hsu, P. L., Yang, W. T., 'Realtime 3D Simulation of 3-axis Milling Using Isometric Projection,' Computer-Aided Design, Vol. 25 No. 4, pp. 215-224, 1993 https://doi.org/10.1016/0010-4485(93)90052-P
  5. S. Yang, J. Yuan, J. Ni, 'Real-time cutting force induced error compensation on a turning center,' International Journal of Machine Tools and Manufacture, Vol. 37, No. 11, pp. 1597-1610, 1997 https://doi.org/10.1016/S0890-6955(97)00028-X
  6. 이상규, 고성림. '엔드밀 가공시 표면형성 예측을 통한 정밀가공에 관한 연구', 한국정밀공학회지, 제16권, 제4호, pp .229-236, 1999
  7. Baek, D. K., Ko, T. J., Kim, H. S., 'A Dynamic Surface Roughness Model for Face Milling,' Precision Engineering, Vol. 20, No. 3, pp. 171-178, 1997 https://doi.org/10.1016/S0141-6359(97)00043-3
  8. Elbestawi, M. A., Ismail, F., Yean, K. M., 'Surface Topography Characterization in Finish Milling,' International Journal of Machine tools and Manufacture, Vol. 34, No. 2, pp. 245-255, 1994 https://doi.org/10.1016/0890-6955(94)90104-X
  9. 백대균, 고태조, 김희술, '가상 밀링에서 이송속도를 고려한 가공 검증 모델,' 한국정밀공학회지, 투고중
  10. Bergs, T., Rodriguez, C., Altan, T., Altintas, Y., 'Tool path optimization for finish milling of die and mold surfaces - software development,' Transactions of NAMRI/SME, Vol. 24, pp. 81-86, 1996
  11. 이기우, 노상도, 신동목, 한형상, '절삭부하 예측을 통한 NC코드 후처리시스템,' 한국정밀공학회지, 제17권, 제5호, pp. 116-123, 2000
  12. 백대균, 고태조, 김희술, 'Z-map 기반 가공 검증모델을 이용한 칩부하 제어,' 한국정밀공학회지, 투고중