초록
SP 방법의 장점중 하나는 개인의 응답자로부터 다수의 응답(Repeated observations)을 받을 수 있는 점이다. 그러나 이렇게 얻은 개인의 다중응답을 각각의 응답이 독립적이라는 것을 가정하고 있는 단순한 모델링방법을 이용해서 분석하면 t값이 상향되는 문제를 가져올 수 있다. 이러한 문제를 다중응답의 문제(Reapeated Measurement Problem)라고 한다 본 연구는 다양한 접근을 통해서 이러한 다중응답의 문제(Reapeated Measurement Problem)를 다루고, 단순한 모델링방법을 통한 모델추정치가 신뢰할 만한가를 검증하도록 한다. 다양한 접근중에서 본 연구에서는 Jackknife와 Kocurs 방법을 적용하였다. Jackknife 방법은 JACKKNIFE란 소프트웨어를 사용해서 분석하였다. Jackknife 추정치와 Kocurs 추정치를 단순한 모델링기법을 적용한 모델추정치와 비교하여서 다중응답의 문제(Repeated Measurement Problem)의 발생여부와 모델추정치에 어느정도 영향을 미치는 지를 분석하였다. 단순모델링의 추정치와 Jackknife 추정치의 표준오차도 비교하였다. 결과를 요약하면. Kocurs방법의 추정치의 t값은 단순한 모델링기법과 Jackknife 추정치의 t값보다 매우 낮게 나타났으며, 이는 Kocurs방법은 파라미터의 유의성을 지나치게 하향추정하는 것을 의미한다. Jackknife 방법의 추정치는 단순한 모델링기법의 추정치와 계수값은 거의 유사하나 t값이 다소 적은 것으로 나타났다. 이러한 결과들은 단순한 모델링기법의 계수값은 정확하나 유의정도가 다소 과장되는 것을 의미한다. 결론적으로 본 연구에서 사용한 데이터에는 다중응답의 문제가 존재하나 모델추정 티에 유의하게 영향을 미치지 않는 것으로 나타났다 SP 방법을 사용한 데이터를 분석할 경우 다중응답의 문제(Repeated Measurement Problem)를 분석하는 절차를 반드시 수행하여야 한다. 만약 단순한 모델링기법의 추정치가 다중응답의 문제로 인해서 영향을 받았다면 반드시 모델링 추정치를 보정하여야 한다.
One of the advantages of SP methods is the possibility of getting a number of responses from each respondent. However, when the repeated observations from each respondent are analysed by applying the simple modeling method, a potential problem is created because of upbiased significance due to the repeated observation from each respondent. This study uses a variety of approaches to explore this issue and to test the robustness of the simple model estimates. Among several different approaches, the Jackknife method and Kocurs method were applied. The Jackknife method was implemented using a program JACKKNIFE. The model estimate results of Jackknife method and Kocurs method were compared with those of the uncorrected estimates in order to test whether there was repeated measurement problem or not and the extent to which this problem affected the model estimates. The standard errors between the uncorrected model estimates and Jackknife estimates were also compared. The results reveals that the t-ratios of Kocurs are much lower than those of the uncorrected method and Jackknife estimates, indicating that Kocurs method underestimates the significance of the coefficients. Jackknife method produced the almost same coefficients as those of the uncorrected model but the lower t-ratios. These results indicate that the coefficients of the uncorrected method are accurate but that their significance are somewhat overestimated. In this study. 1 concluded that the repeated measurement Problem did exist in our data, but that it did not affect the model estimation results significantly. It is recommended that such a test should become a standard procedure. If it turns out that the analysis based on the simple uncorrected method are influenced by the repeated measurement problem. it should be corrected.