Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Aircraft Wing Spar Cross-section Area Optimization with Response Surface Method

반응면 기법을 이용한 항공기 날개 스파 단면적의 최적화 연구

  • Park, Chan-Woo (Dept. of Transportation Mechanical Engineering, Gyeongsang National University)
  • 박찬우 (경상대학교 수송기계공학부)
  • Published : 2002.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The solution of the aircraft wing spar cross-section area optimization problem is obtained by the response surface method. The object function of the problem is wing total weight, design variables are spar cross-section areas, constraints are the conditions that the stresses at the each spar is less than the allowable stress. D-Optimal condition is utilized to obtain the experimental points to construct the response surfaces. D-Optimal experimental points are obtained by the commercial software "Deign-Expert". Response values for the object function and constraints for each experimental point are calculated by the NASTRAN. Response surfaces for object function and constraints are approximated from the response values by the least square method. The optimization solution is obtained by the DOT for the response surfaces of object function and constraints. The optimization results obtained from the response surface are compared with the results obtained by the NASTRAN SOL200.

Keywords

References

  1. R. Unal, R. Lepsch, M. McMillin, 'Response Surface Model Building and Multidisciplinary Optimization using D-Optimal Designs,' AIAA-98-4759
  2. Anthony A. Giunta, 'Aircraft Multidisciplinary Design Optimization using Design of Experiments Theory and Response Surface Modeling Methods,' MAD Center Report 97-05-01, Virginia Polytechnic Institute & State university, May, 1997
  3. B.Liu, R.T.Haftka, M.A.Akgun, 'Two-level composite wing structural optimization using response surfaces,' Structural Multidisciplinary Optimization Vol. 20, pp. 86-87, Springer-Verlag, 2000 https://doi.org/10.1007/s001580050140
  4. G. Li, H. Wang, S.R. Aryasomayajula, R.V. Grandhi, 'Two-level optimization of airframe structures using response surface approximation,' Structural Multidisci-plinary Optimization Vol. 20, pp. 116-124, Springer-Verlag, 2000 https://doi.org/10.1007/s001580050143
  5. 박문식, 배동우, '민간 수송기의 Wing Box에 대한 포괄적 구조치수 최적화 기법 개발,' 한국항공우주학회지, 제 25 권, 제 2 호, pp. 155-166, 1997
  6. 김철, 조중찬, '많은 설계변수를 가진 항공기 Wing Box의 치수 최적설계 및 응력해석,' 한국항공우주학회지, 제 26 권, 제 2 호, 1998
  7. 권진회, 문창호, '항공기 날개의 내력 해석을 위한 유한요소 모델링 및 초기 치수화 기법연구,' 한국항공우주학회지, 제 26 권, 제 5 호, 1998
  8. 박찬우, 노정무, '항공기 날개 스파의 단면적과 위치를 설계변수로 하는 중량 최적화 연구,' 한국항공우주학회 춘계학술발표회 논문집, pp. 671-676, 2001
  9. R.H. Myers, 'Response Surface Methodology,' Wiley Inter-Science, 1995
  10. Design-Expert Version 6 User's Guide, Stat-Ease Inc.
  11. MSC/NASTRAN V70 User's Manual, The MacNeal-Schwendler Corporation