International Journal of Precision Engineering and Manufacturing

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Dynamic Characteristics of Indeterminate Rotor Systems with Angular Contact Ball Bearings Subject to Axial and Radial Loads

  • Hong, Seong-Wook (School of Mechanical Engineering, Kumoh National University of Technology) ;
  • Kang, Joong-Ok (Graduate School, Kumoh National University of Technology) ;
  • Yung C. Shin (School of Mechanical Engineering, Purdue University, West Lafayette. USA)
  • Published : 2002.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the dynamic analysis of indeterminate rotor systems with angular contact ball bearings subject to axial and radial loads. The reaction forces against applied radial loads significantly influence the dynamic characteristics of angular contact ball bearings. However, the reaction forces are hard to determine in the case of indeterminate rotor-bearing systems. To this end, this paper proposes a finite element model for indeterminate rotor systems with angular contact ball bearings. An improved bearing model is adopted which is originated from the Harris's bearing dynamic model. The bearing model is also extended to include centrifugal forces due to the ball and inner ring. This paper utilizes a new iterative algorithm for general, indeterminate rotor systems with angular contact ball bearings. This examples are provided to illustrate the dynamic characteristics of rotor systems with angular contact ball bearings subject to axial and radial loads. The experimental and numerical results prove that the proposed method is useful for the dynamic analysis of indeterminate rotor systems with angular contact ball bearings.

Keywords

References

  1. Jorgensen, B. R., 'Dynamic Analysis of Spindle Bearing Systems,' Ph.D Thesis, Purdue University, USA, 1997
  2. Reddy, W. R., and Sharan, A. M., 'The finite element modeled design of lathe spindles: the static and dynamic analyses,' Trans. ASME, Journal of Vibration, Acoustics, Stress and Reliability in Design, Vol.109, pp. 417-415, 1987
  3. Sadeghipuor, K. and Cowley, A., 'The Effect of Viscous Damping and Mass-Distribution on the Dynamic Behavior of a Spindle-Bearing System,' International Journal of Machine Tools and Manufacture, Vol. 26, No. 4, pp. 69-77, 1988 https://doi.org/10.1016/0890-6955(88)90008-9
  4. Al-Shareef, K. J. H., and Brandon, J. A., 'On the Effects of the Variations in the Design Parameters on the Dynamic Performance of Machine Tools Spindle Bearing Systems,' International Journal of Machine Tools and Manufacture, Vol. 30, No. 3, pp. 432-445, 1990
  5. Brandon, J. A., and Al-Shareef, K. J. H., 'Optimization Strategies for Machine Tool Spindle Bearing Systems: a Critical Review,' Trans. ASME, Journal of Engineering for Industry, Vol. 114, pp.244-253, 1992
  6. Wang, W. R., and Chang, C. N., 'Dynamic Analysis and Design of a Machine Tool Spindle Bearing System,' Trans. ASME, Journal of Vibration and Acoustics, Vol. 116, pp. 280-285, 1994 https://doi.org/10.1115/1.2930426
  7. Wang, K. W., Shin, Y. C. and Chen, C. H., 'On the Natural Frequencies of High-Speed Spindles with Angular Contact Bearings,' Proceedings of Institutions of Mechanical Engineering, Journal of Mechanical Engineering Science, Vol. 205, pp. 147-154, 1992 https://doi.org/10.1243/PIME_PROC_1991_205_105_02
  8. Chen, C. H., Wang, K. W. and Shin, Y. C., 'An Integrated Approach Toward the Dynamic Analysis of High Speed Spindles, Part 1: System Model,' Trans. ASME, Journal of Vibration and Acoustics, Vol. 116, pp. 506-513, 1994 https://doi.org/10.1115/1.2930456
  9. Jorgensen, B. R., and Shin, Y. C., 'Robust Modeling of High Speed Spindle Dynamics,' Trans. ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 2, pp. 387-394, 1998 https://doi.org/10.1115/1.2830138
  10. Shamine, D. M., Hong, S. W., and Shin, Y. C., 'Experimental Identification of Dynamic Parameters of Rolling Element Bearings in Machine Tools,' Trans.ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 122, No. 1, pp. 95-101, 2000 https://doi.org/10.1115/1.482432
  11. Harris, T. A., Rolling Bearing Analysis, New York: John Wiley & Sons , 1990
  12. Hagiu, G. D., and Gafitanu, M. D., 'Dynamic Characteristics of High Speed Angular Contact Ball Bearings,' Wear, Vol. 211, pp. 22-29, 1997 https://doi.org/10.1016/S0043-1648(97)00076-8
  13. Lee, C. W., and Hong, S. W., 'Asynchronous Harmonic Response Analysis of Rotor-Bearing Systems,' International Journal of Analytical and Experimental Modal Analysis, Vol. 5, No. 2, pp. 51-65, 1990
  14. Hashish, E., and Sankar, T. S., 'Finite Element and Modal Analyses of Rotor Bearing Systems under Stochastic Loading Conditions,' Trans. ASME, Journal of Vibration, Acoustics, Stress and Reliability in Design, Vol. 106, pp. 890-898, 1984
  15. http://www.netlib.org/minpack