Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Static and Dynamic Fracture Analysis for the Interface Crack of Isotropic-Orthotropic Bimaterial

  • Lee, Kwang-Ho (Department of Mechanical Engineering, Sangju National University) ;
  • Arun Shukla (Department of Mechanical Engineering and Applied Mechanics, University of Rhode Island) ;
  • Venkitanarayanan Parameswaran (Department of Mechanical Engineering and Applied Mechanics, University of Rhode Island) ;
  • Vijaya Chalivendra (Department of Mechanical Engineering and Applied Mechanics, University of Rhode Island) ;
  • Hawong, Jae-Sug (Department of Mechanical Engineering, Yeoungnam University)
  • Published : 2002.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

In the present study, interfacial cracks between an isotropic and orthotropic material, subjected to static far field tensile loading are analyzed using the technique of photoelasticity. The fracture parameters are extracted from the full-field isochromatic data and the same are compared with that obtained using boundary collocation method. Dynamic photoelasticity combined with high-speed digital photography is employed for capturing the isochromatics in the case of propagating interfacial cracks. The normalized stress intensity factors for static cracks are greate. when ${\alpha}$: 90$^{\circ}$(fibers perpendicular to the interface) than when ${\alpha}$=0$^{\circ}$(fibers parallel to the interface), and those when ${\alpha}$=90$^{\circ}$are similar to ones of isotropic material. The dynamic stress intensity factors for interfacial propagating cracks are greater when ${\alpha}$=0$^{\circ}$ than ${\alpha}$=90$^{\circ}$. For the velocity ranges (0.1 < C/C$\sub$s1/<0.7) observed in this study, the complex dynamic stress intensity factor │K$\sub$D/│increases with crack speed c, however, the rate of increase of │K$\sub$D/│with crack speed is not as drastic as that reported for homogeneous materials.

Keywords

References

  1. Deng, X., 1993, 'General Crack-Tip Fields for Stationary and Steadily Growing Interface Cracks in Anisotropic Bimaterials,' J. of Appl. Mech., Vol. 60, pp. 183-189 https://doi.org/10.1115/1.2900743
  2. Gdoutos, E.E. and Papakaliatakis, 1982, 'Photoelastic Study of a Bimaterial Plate with a Crack Along the Interface,' Engng. Fract. Mech., Vol. 16, No. 2, pp.177-182
  3. Kavaturu, M. and Shukla, A., 1998, 'Dynamic Fracture Criteria for Crack Growth Along Bimaterial Interfaces,' J. of Appl. Mech., Vol. 60, pp. 293-299 https://doi.org/10.1115/1.2789054
  4. Kobayashi, T. and Dally, J.W., 1977, 'The relation Between Crack Velocity and Stress Intensity Factor in Birefringent Polymers, Fast Fracture and Crack Arrest,' ASTM STP627
  5. Lambros, J. and Rosakis, A.J., 1995a, 'Development a Dynamic Decohesion Criterion for Subsonic Fracture of the Interface Between Two Dissimilar Materials,' Proc. R.Soc. Lond.(A), Vol. 451, pp. 711-736 https://doi.org/10.1098/rspa.1995.0151
  6. Lambros, J. and Rosakis, A.J., 1995b, 'Dynamic decohesion of Bimaterial: Experimental Observation and Failure Criteria,' Int. J. Solids Struct., Vol. 32, No. 17, 18, pp. 2677-2702 https://doi.org/10.1016/0020-7683(94)00291-4
  7. Lee, K.H., 1999, 'Stress and Displacement Fields for Propagating Crack along Interface of Isotropic-Orthotropic Material under Dynamic Mode Ⅰ and Ⅱ Load,' Transactions of the KSME(A), Vol. 23, No. 9, pp. 1463-1475
  8. Lee, K.H. and Choi, Y.C., 1999, 'Analysis of Propagating Flat Crack in Orthotropic Rectangular Plate,' Transactions of the KSME(A), Vol. 23, No. 1, pp. 89-98
  9. Lu, H.and Chiang, F.P., 1993, 'Photoelastic Determination of Stress Intensity Factor of an Interfacial Crack in a Bi-material,' J. of Appl. Mech., Vol. 60, pp. 93-100 https://doi.org/10.1115/1.2900785
  10. Robert, J.S., 1980, 'Application of the Least Square Method to Photoelastic Analysis,' Exp. Mech., pp. 192-197
  11. Yang, W., Suo, Z. and Shih, C.F., 1991, 'Mechanics of Dynamic Debonding,' Proc. R. Soc. of Lond, Vol. 433, pp. 679-697 https://doi.org/10.1098/rspa.1991.0070