DOI QR코드

DOI QR Code

A Study on Rudder-Roll Stabilization System Design for Ship

방향타를 이용한 선박 횡동요 제어계 설계에 관한 연구


Abstract

In ship operation the consequency of roll motions can seriously degrade the performance of mechanical and personnel effectiveness. So many studies for the roll stabilization control system design have been performed and very good results have been achieved. In many studies, the stabilizing fins are used. Recently rudders, which have been extensively modified, have been used to exclusively to stabilize the roll. This paper examines the two-degree-of-freedom servosystem design technique to synthesize the yaw control system which achieves the course keeping object of the ship and the H$_{\infty}$ control approach to suppress the roll motion, respectively.

Keywords

References

  1. Burger, W. and Corbet, A. G., 1960, Ship Stabilizers, Their Design and Operation in Correcting the Rolling Ships, A Handbook for Merchant Navy Officers, Pergamon Press. Ltd, London
  2. Van der Klugt, P. G. M., 1987, Rudder Roll Stabilization, Ph. D.Thesis, Delft University of Technology, The Netherlands
  3. Lauvdal, T. and Fossen, T. I., 1998, 'Rudder Roll Stabilization of Ships Subject to Input Rate Saturation Using a Gain Scheduling Control Law,' Proc. of IFAC CAMS '98, pp. 121-126
  4. Yang, C. and Blanke, M., 1998, 'Rudder-Roll Damping Controller Design Using ${\mu}$ Sythesis,' Proc. of IFAC CAMS '98, pp. 127-132
  5. Sellars, F. H. and Martin, J. P., 1992, 'Selection and Evaluation of Ship Roll Stabilization Systems,' Marine Technology, Vol. 29, No. 2, pp. 84-101
  6. Christensen A. and Blanke, M., 1986, 'A Linearized State-Space Model in Steering and Roll of a High-Speed Container Ship,' Technical Report 86-D-574, Servolaboratoriet, Technical University of Denmark
  7. Fossen, T. I., 1994, Guidance and Control of Ocean Vehicles, John Wiely and Sons Ltd
  8. Fujisaki Y. and Ikeda, M., 1992, 'A Two-degree-of freedom Design of Optimal Servosystem,' Proc. of 31st IEEE CDC, pp. 3588-3589
  9. Fujisaki, Y. and Ikeda, M., 1991, 'Synthesis of Two-degree-of-freedom Servosystems,' Trans. SICE, Vol. 27, No. 8, pp. 907-914 https://doi.org/10.9746/sicetr1965.27.907
  10. Hagiwara, T., Yamasaki, T. and Araki, M., 1993, 'A Two-degree-of-freedom Design Method of LQI Servosystem, Part I,' Preprints of 12th IFAC World Congress, Vol. I, pp. 453-455
  11. Hagiwara, T., Ohtani, Y. and Araki, M., 1991, 'A Design Method of LQI Servo Systems with Two Degree of Freedom,' Trans. iSCle, Vol. 4, No. 12, pp. 501-510 https://doi.org/10.5687/iscie.4.501
  12. Kim, Y., Fujisaki, Y. and Ikeda, M., 1994, 'Robust Stability and High-gain Compensation of a Two-degree-of-freedom Servosystem,' The 17th SICE Symposium on Dynamical System Theory, pp. 325-330
  13. Kobayashi, M., Kim, Y. B., Ikeda, M. and Fujisaki, Y., 1995, 'On Robust Stability of Two-degree-of-freedom Servosystem Incorporating an Observer,' The 39th Annual Conference of iSCle, pp. 263-264
  14. Kim, Y. B., Ikdea, M., Kobayashi, M. and Fujisaki, Y., 1995, 'High-agin Compensation of a Two-degree-of-freedom Servosystem Incorporating an Observer,' The 24th SICE Symposium on Control Theory, pp. 107-110
  15. Kim, Y. B., Fujisaki, Y. and Ikeda, M., 1998, 'Robust Stability of Two-degree-of freedom Servosystem with a Tuning Gain,' Trans. SICE, Vol. 34, No. 10, pp. 1411-1418 https://doi.org/10.9746/sicetr1965.34.1411
  16. Kim, Y. B., 2000, 'Robust Stability of a Two-Degree-of-Freedom Servosystem with Structured and Unstructured Uncertainties,' KSME Int. Journal, Vol. 14, No. 11, pp. 1198-1205
  17. Sanov, M. G., Limebeer, D. J. N. and Chiang, R. Y., 1992, Robust Control Toolbox User's Guide, The MathWorks Inc
  18. Oda, H. et. al., 1992, 'Rudder-Roll Stabilization Control System through Multivariable Auto Regressive Model,' Proc. of the IFAC CAMS'92, Genoa, Italy, pp. 113-127

Cited by

  1. Development of an Anti-Seasickness Bed used in Vessel vol.18, pp.4, 2014, https://doi.org/10.9726/kspse.2014.18.4.112