초록
리브로 보강된 철골 모멘트 내진접합부에 대한 실용적이고 간단한 설계법이 등가스트럿 모델을 바탕으로 최근에 제안된 바가 있다. 본 논문에서는 제안된 설계법을 검증하고 응력집중에 의한 리브 단부의 균열방지 방안을 모색하기 위한 실험결과를 기술하였다. 제안된 설계법에 의해 설계된 모든 실물대 시험체는 접합부의 소성회전각이 0.04(radian)에 이르는 뛰어난 내진성능을 발휘하였다. 접합부를 리브로 보강함과 동시에 보의 플래지 일부를 잘라내어 보의 소성힌지와 국부좌굴의 발생위치를 리브의 끝단으로부터 보 안쪽으로 약간 이동시킴으로서, 리브단부의 균열발생을 효과적으로 제어할 수 있음을 실험적으로 확인하였다. 또한 리브의 스트럿 작용과 이로 인한 보 웨브에서의 전단역전을 스테레인 게이지 계측을 통하여 실험적으로 입증하였다.
A simple design method for rib-reinforced seismic steel moment connections has been recently proposed based on the equivalent strut model. An experimental program was implemented to verify the proposed design method, as well as develop the schemes that will prevent cracking at the rib tip where stress concentration was evident. All specimens designed using the proposed method were able to develop a satisfactory connection plastic rotation of 0.04 radian. In addition to rib reinforcement, slight beam flange trimming pushed the plastic hinging and local buckling of the beam away from the rip tip and effectively reduced cracking potential at the rib tip. Using strain gage readings, the strut action of the rib and resulting reverse shear in the beam web were also experimentally identified.