LNG 304 스테인레스강의 피로균열전파특성과 변형유발 마르텐사이트 함량의 변화

Characteristics of Fatigue Crack Propagation and Changes in Strain Induced Martensite α' of STS 304 Stainless Steel

  • 김송희 (강원대학교 신소재공학과) ;
  • 박형래 (춘천기능대학 재료학과) ;
  • 이현승 (강원대학교 신소재공학과)
  • 발행 : 2001.12.31

초록

The effect of initial ${\alpha}^{\prime}$ in STS 304 Stainless Steel on fatigue resistance, and fatigue crack propagation behavior was studied with using C-T specimens. Higher ${\Delta}K_{th}$ was observed in the specimens with the content of 0% initial ${\alpha}^{\prime}$ than in the contents of 2% and 33% initial ${\alpha}^{\prime}$. The difference of da/dN at the same level of ${\Delta}K$ was distinctive in low and intermediate level of ${\Delta}K$ however became less different as the level of ${\Delta}K$ increased. It is because the formation of strain induced martensite occurred readily in lower ${\alpha}^{\prime}$ at the vicinity of the fatigue crack tip, which causes compressive residual stresses resulting in the enhancement of crack closure. In general fatigue cracks propagated transgranular mode and many segments of ridges were observed on the fracture surfaces. At the higher contents of initial ${\alpha}^{\prime}$ appeared the smaller size of ridge segments. Slips in austenite were blocked more frequently by the martensite colonies formed in austenite.

키워드