Structural Engineering and Mechanics

  • 제12권2호
  • /
  • Pages.157-168
  • /
  • 2001
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Complete collapse test of reinforced concrete columns

  • Abdullah, Abdullah (Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology) ;
  • Takiguchi, Katsuki (Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology)
  • 발행 : 2001.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, experimental investigation into the behavior of reinforced concrete (RC) columns tested under large lateral displacement with four different types of loading arrangements is presented. Each loading arrangement has a different system for controlling the consistency of the loading condition. One of the loading arrangements used three units of link mechanism to control the parallelism of the top and bottom stub of column during testing, and the remaining employed eight hydraulic jacks for the same purpose. The loading systems condition used in this investigation were similar to the actual case in a moment-resisting frame where the tested column was displaced in a double curvature. Ten model column specimens, divided into four series were prepared. Two columns were tested monotonically until collapse, and unless failure took place at an earlier stage of loading, the remaining eight columns were tested under cyclic loading. Test results indicated that the proposed system to keep the top and bottom stubs parallel during testing performed well.

키워드

참고문헌

  1. A Report of the Taiwan-US Geotechnical Earthquake Engineering Reconnaissance Team (1999), "Preliminarygeotechnical earthquake engineering observation of the september 21, 1999, Ji-Ji, Taiwan Earthquake",October 8, 1999.
  2. AIJ (1994), "Structural design guidelines for reinforced concrete building", Architectural Institute of Japan, 207p.
  3. Dowling, P.J. (1998), "Observations from recent earthquakes and implications on structural design", Proc. ofSecond Japan-UK Workshop on Implications of Recent Earthquakes on Seismic Risk, April 6-9, TokyoInstitute of Technology, Tokyo, Japan.
  4. EERI Special Earthquake Report (1999), "The Izmit (Kocaeli), Turkey Earthquake of August 17", October 1999.
  5. Suzuki, T., Takiguchi, K., Okamoto, T., and Kato, M. (1985), "Experiments on the effects of hoopreinforcements in the steel and R/C composite", J. Struct. Constr. Eng., AIJ, No. 348, February, 61-74.
  6. Takiguchi, K., Kokusho, S., Kobayashi, K., and Kimura, M. (1979), "Study on the restoring force characteristicsof reinforced concrete columns to bi-directional displacements", Trans. AIJ, No. 286, 29-35.
  7. Takiguchi, K., Nagashima, T., and Irei, T. (1994), "Strength of small size steel encased reinforced concretecolumns with high strength materials under cyclic loading", J. Struct. Constr. Eng., AIJ, No. 466, Dec., 155-163.
  8. Takiguchi, K., Ogura, N., and Yanagi, K. (1998), "Complete collapse test of flexural failure RC column", J.Architecture and Building Science, 113(1429), 47-51.

피인용 문헌

  1. Analytical investigations of seismic responses for reinforced concrete bridge columns subjected to strong near-fault ground motion vol.6, pp.3, 2007, https://doi.org/10.1007/s11803-007-0757-8