Grain Structure Analysis in Rolled 1050 Al Alloy Sheets Using EBSD

EBSD에 의한 A1050 압연판재의 결정립 구조 분석

  • Han, Jun-Hyun (Alloy Design Research Center, Korea Institute of Science and Technology) ;
  • Shin, Myung-Chul (Alloy Design Research Center, Korea Institute of Science and Technology)
  • 한준현 (한국과학기술연구원, 합금설계연구센터) ;
  • 신명철 (한국과학기술연구원, 합금설계연구센터)
  • Received : 2001.01.12
  • Published : 2001.02.25

Abstract

The effect of cryogenic heavy rolling method on grain refinement has been studied and compared with those obtained by previous methods of cryogenic rolling and heavy rolling developed separately. Both grain structure and grain size were analyzed using electron back scattered diffraction (EBSD), which can distinguish grains each other by means of crystallographic misorientations between them. The cryogenic rolling and heavy rolling exhibit reduction in grain size of 39% and 87%, respectively, and the cryogenic heavy rolling shows reduced grain size similar to that observed in the heavy rolling. The heavy rolling was proved more effective in grain size refinement than the cryogenic rolling.

압연판재의 결정립 미세화를 위해 새롭게 도입된 극저온 강압연법을 극저온 압연법, 상온 강압연법과 비교 분석하였다. EBSD를 이용하여 결정립 구조를 분석하였으며, 결정립 크기를 측정하였다. 극저온 압연법과 상온 강압연법은 각각 39%와 87%의 결정립 크기 감소효과를 보였으며, 극저온 강압연법은 상온 강압연법과 비슷한 결정립 감소효과를 갖고 있었다. 따라서 강압연법이 극저온 압연법보다 결정립 미세화에 훨씬 더 효과적임을 알 수 있었다.

Keywords

References

  1. Pro.Phys.Soc v.643 E.O.Hall
  2. J.Iron Steel Inst. v.173 N.J.Petch
  3. Mater.Trans.JIM. v.36 Y,Kimura;S,Takaki
  4. Scripta Met v.25 R.Z.Valiev;R.R.Mulyukov;V.V.Ovchinikov;V.A.Shabashov
  5. J.of Mater Sci.Letters v.9 R.Z.Abdulov;R.Z.Valiev;N.A.Kraslinikov
  6. Acta Metall.Mater. v.43 J.Lian;R,Z,Valiev;B,Baudelet
  7. Mater.Sci,Forum v.113 O.Kaibyshev;R.Kaibyshev;G.Salishchev
  8. Journal of Japan Institute of Light Metals v.39 M.Kobatashi;Y,Hirotsu;Y,Ohtani;T,Takahashi;M.Tatemura
  9. Journal of the Japan Institute of Metals v.57 S.Kuramoto;M.Kanno;G.Itoh
  10. Journal of the Japan Institute of Meatls v.63 N,Tsuji;T,Murakami;Y,Saito
  11. Journal of the Japan Institute of Metals v.63 Y.Saito;H.Utsunomiya;N.Tsuju;T.Sakai;T.Hong
  12. Journal of the Japan Society of Technology of Plasticity v.26 H.Asao;M.Kobatashi
  13. J.of Kor.Inst.Met.and Mater v.37 D.H.Shin;K.H.Oh;W.J.Kim;S.W.Lee;W.Y.Choo
  14. J.of Kor.Inst.Met and Mater v.37 J.Y,Chang;H,S,Ko;S,mG,Choi;I.G.Moon
  15. Acta,mater v.45 Y,Iwahashi;Z.Horita;M.Nemoto;T,G,Langdon