대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

냉동기운전 고온초전도코일의 안전성평가기준에 관한 연구

A Study on Stability Criterion for Cryocooler Operating HTS Coils

  • 석산돈사 (와세다대 전기전자정보공학과) ;
  • 김석범 (서울대 전기·컴퓨터공학부) ;
  • 한경희 (명지대 전기정보제어공학부)
  • 발행 : 2001.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We investigated the stability of cryocooler-cooled high-temperature superconducting (HTS) coils by using a computer program based on FEM. In this study, the current at which "thermal runaway" occurs, which depends on the relationship between the cooling power of the cryocooler and the heat generation in HTS coils, was adopted as a stability criterion of cryocooler operating HTS coils. It was shown that cryocooler-cooled HTS coil was stable in operating current above the critical current from the numerical analysis results by HTS model coil. And also, if we efficiently remove the heat generation from HTS coils by potimizing heat drain, the ramp-rate limitation can be mitigated because the effect of AC loss by the current rise was too small. Furthermore, in the case of pulsed operation; the HTS model coil is ramped from zero to the peak value in one second and back to zero current in one second, such as the operation of SMES device, the peak value of poerating current is 1.5-2 times greater than that of the thermal runaway current.

키워드

참고문헌

  1. Y. Iwasa, 'A critical current-margin design criterion for high performance magnet stability,' Cryogenics 18, pp. 705-714, 1979 https://doi.org/10.1016/0011-2275(79)90188-7
  2. S. B. Kim and A. Ishiyarna, 'Transient stability analysis in Bi-2223/Ag superconducting tapes,' IEEE Trans. on Appl, Supercond., Vol. 7, No. 2, pp. 203-206, 1997 https://doi.org/10.1109/77.614466
  3. S. Shimizu, A. Ishiyama and S.B. Kim, 'Quench propagation properties in HTS pancake coil,' IEEE Trans. on Appl. Supercond., Vol. 9, No. 2, pp. 1077-1080, 1999 https://doi.org/10.1109/77.783484
  4. Kazuo Watanabe, 'Liquid helium-free superconducting magnets,' 일본 저온공학, Vol. 34, No. 5, pp. 179-187, 1999
  5. V. S. Vysotsky et al., 'Thermal quench study in HTSC pancake coil,' Cryogenics 40, pp. 9-17, 2000 https://doi.org/10.1016/S0011-2275(99)00133-2
  6. J. W. Lue, M. S. Lubell, D. Azid, J. M. Campbel and R.E. Schwall 'Quench in a high-temperature superconducting tape and pancake coil,' Cryogenics 36. No. 5, pp. 379-389, 1996 https://doi.org/10.1016/0011-2275(96)81109-X
  7. S. S. Kalsi et al., 'HTS SMES magnet design and test results,' IEEE Trans. on Appl. Supercond., Vol. 7, No. 2, pp. 971-976, 1997 https://doi.org/10.1109/77.614667
  8. S. B. Kim, A. Ishiyama, H. Okada and S. Nomura, 'Normal-zone propagation properties in Bi-2223/Ag superconducting multifilament tapes,' Cryogenics, Vol. 38, No.8, pp. 823-831, 1998 https://doi.org/10.1016/S0011-2275(98)00056-3