DOI QR코드

DOI QR Code

섬유보강 고인장강도 콘크리트를 이용한 이중 콘크리트 보의 휨 거동 해석

Flexural Behavior of Dual Concrete Beams Using Fiber Reinforced Concrete at Tensile Parts

  • 발행 : 2001.12.01

초록

철근콘크리트보(reinforced concrete beam)는 콘크리트의 압축강도에 비해 낮은 인장강도로 인해 사용하중 단계에서 균열이 발생하게 된다. 발생된 균열에 의해 감소된 콘크리트의 휨강성은 전체적인 구조물의 강도와 강성을 감소시킨다. 인장강도 및 휨강도를 증가시킨 섬유보강 콘크리트(fiber reinforced concrete)를 인장영역에 이용함으로서 구조물의 강도와 강성을 증가시킬 수 있을 뿐만 아니라 균열 및 처짐이 감소되는 효과가 있으므로 구조물의 전체적인 안전성과 사용성을 확보할 수 있다. 본 연구에서는 보통강도 콘크리트(normal strength concrete)와 고인장강도 콘크리트(high tensile strength concrete)의 합성으로 이루어진 이중 콘크리트보(dual concrete beam)의 힘의 평형조건과 변형률 적합조건을 이용하여 탄성해석과 극한해석 모델을 제안한다. 세 가지 종류의 철근비에 대해 각각 하나의 철근콘크리트보와 두 개의 이중 콘크리트보를 시험하여 이중 콘크리트보의 구조적 강성을 검토하였다. 이중 콘크리트보는 철근콘크리트보에 비해 약 30%이상의 극한하중의 증가를 나타내었고, 휨강성의 증가와 더불어 처짐이 감소되었다.

The cracks are developed in reinforced concrete(RC) beams at the early stage of service load because of the relatively small tensile strength of concrete. The structural strength and stiffness are decreased by reduction of tensile resistance capacity of concrete due to the developed cracks. Using the fiber reinforced concrete that is increased the flexural strength and tensile strength at tensile part can enhance the strength and stiffness of concrete structures and decrease the tensile flexural cracks and deflections. Therefore, the RC beams used of the fiber reinforced concrete at. tensile part ensure the safety and serviceability of the concrete structures. In this work, analytical model of a dual concrete beams composed of the normal strength concrete at compression part and the high tension strength concrete at tensile part is developed by using the equilibrium conditions of forces and compatibility conditions of strains. Three groups of test beams that are formed of one reinforced concrete beam and two dual concrete beams for each steel reinforcement ratio are tested to examine the flexural behavior of dual concrete beams. The comparative study of total nine test beams is shown that the ultimate load of a dual concrete beams relative to the RC beams is increased in approximately 30%. In addition, the flexural rigidity, as used here, referred to the slope of load-deflection curves is increased and the deflection is decreased.

키워드

참고문헌

  1. High Performance Fiber Reinforced Cement Composites;Proceedings of the International RILEM/ACI Workshop Advanced Cement-Based Matrices Composites Jenning H.M.
  2. Journal of Ceramic Society of Japan v.106 no.3 Characterization of Fiber Reinforced Macro-Defect-Free Cementitious Materials Park C.K.
  3. Fibre Reinforced Cement and Concrete Toughness Behavior of Fibre-Reinforced Concrete Lin W.L.;Swamy R.N.(ed.)
  4. High Performance Fiber Reinforced Cement Composites Flexural Behaviour of Concrete Elements Reinforced with Carbon Fibres Brandt A.M.;Glinicki M.Z.;Reinhardt(ed.);Naaman A.E.(ed.)
  5. High Performance Fiber Reinforced Cement Composites Application of Carbon Fiber Reinforced Mortar in Composite Slab Construction Bayasi M.Z.
  6. Journal of Structural Engineering v.118 no.10 Deformational Behavior of Reinforced Fiber Reinforced Concrete Beams in Bending Dwarakanath H.V.;Nagaraj T.S.
  7. ACI Structural Journal Design Consideration for Steel Fiber Reinforced Concrete ACI Committee 544
  8. Fibre-Reinforced Cement and Concrete;RILEM Symposium v.2 The Effect of Post Cracking Ductility on Flexural Strength of Fibre Cement and Fibre Concrete Hannant D.J.