참고문헌
- Focke, W. W., Zachariades, J. and Oliver, I., 1985, 'The Effect of the Corrugation' Inclination Angle on the Thermo-hydraulic Performance of Plate Heat Exchangers,' Int. J. Heat Mass Transfer, Vol. 28, No.8, pp. 1469-1479 https://doi.org/10.1016/0017-9310(85)90249-2
- Cooper, A. and Usher, J. D., 1983, Heat Exchanger Design Handbook, Chap. 3.7, Hemisphere Publishing, New York
- Bounpane, R. A. and Troupe, R. A., 1985, 'A Study of the Effects of Internal Rib and Channel Geometry III Rectangular Channels,' AIChE Journal, Vol. 15, No, 4, pp. 585-596 https://doi.org/10.1002/aic.690150421
- Bogaert, R. and Boles. A., 1992, 'Global Performance of a Prototype Brazed Plate Heat Exchanger in a Large Reynolds Number Range,' Experimental Heat Transfer, Taylor & Francis, No.8, pp. 293-311
- Shah, R. K and Focke, W. W., 1988, 'Plate Heat Exchangers and Their Design Theory,' in Shah, R. K, Subbarao, E. C., Mashelkar, R. A. (Eds.), Heat Transfer Equipment Design, Hemisphere, Washington, DC, pp. 227-254
- ASME J. Heat Transfer v.111 Multipass Plate Heat Exchangers Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements Kandlikar, S. G.;Shah, R. K.
- Kandlikar, S. G. and Shah, R. K., 1989, 'Multipass Plate Heat Exchangers Effectiveness -NTU Results and Guidelines for Selecting Pass Arrangements,' ASME J. Heat Transfer, Vol. 111, pp. 300-313
- Shah, R. K. and Wanniarachchi, A. S., 1992, 'Plate Heat Exchanger Design Theory,' Industrial Heat Exchangers, J.M. Buchlin, ed., Von Karman Institute for Fluid Dynamics, Belgium
- Farrell, P., Wert, K. and Webb, R., 1991, 'Heat Transfer and Friction Characteristics of Turbulent Radiator Tubes,' SAE Technical Paper Series, No. 910197
- Collier, J. G., 1981, 'Convective Boiling and Condensation,' 2nd Ed. McGrqwHill, New York, pp. 26-69
- Shah, R. K. and Focke, W. W., 1988, 'Plate Heat Exchangers and Their Design Theory,' Heat Transftr Equipment Design, Hemisphere, Washington, DC, pp. 227-254
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties III Single Sample Experiments,' Mechanical Engineering, Vol. 75, No.1, pp. 3-12
- Kattan, N., Thome, J. R. and Favrat, D., 1998, 'Flow Boiling in Horizontal Tubes Part 2-New Heat Transfer Data for Five Refrigerants,' Trans. ASME, Vol. 120, pp. 148-155
- Yi-Yie Yan, Tsing-Fa Lin, 1999, 'Evaporat ion Heat Transfer and Pressure Drop of Refrigerant R-134a in a Plate Heat Exchanger,' Int. J. Heat Mass Transfer, Vol. 121, pp. 118-127
- Kandlikar, S. G., 1990, 'A General Correlation for Saturated Two-Phase Flow Boiling Horizontal and Vertical Tubes,' Trans. ASME, Vol. 112, pp. 219-228
- Shah. M. M., 1982, 'Chart Correlation for Saturated Boiling Heat Transfer Equations and Further Study,' ASHRAE Transactions, Vol.88, pp. 185-196
- Akers, W. W., Dean, H. A. and Crosser, O., 1958, 'Condensation Heat Transfer within Horizontal Tubes,' Chem. Eng. Prog. 54,. pp. 89-90
- Shah, R. K., .1978, 'Compact Heat Exchanger Selection Methods,' Heat Transfer, Vol. 4, pp. 185-191
- Gaiser, G. and Kottke, V., 1989,' 'Flow Phenomena and Local Heat and Mass Transfer in Corrugated Passages,' Chem. Eng. Tech, No. 12, pp. 400-405
- Kim, N. H. and Cho, J. P., 1999, 'Experimental Investigation of R-22 Condensa -tion in Tubes with Small Inner Diameter,' Journal of Air-Conditioning and Refrigeration, Volume 7, pp. 45-54
- Byun. J. H and Lee. K. J, 2000, 'An Experimental Study of Condensation in Plate Heat Exchangers with R-410A,' Proceedings of the KSME 2000 Spring Annual Meeting B, pp. 304- 310