참고문헌
- David Alkire Smith, 'Die Design Handbook,' SME, 1990
- 太田哲, 'プレス 絞り 加工工程設計,' 日刊工業新聞社, 1972
- 김진무, 유호영, '정사각용기 성형에서 변형률완화에 관한 연구,' 한국정밀공학회지, 제16권, 제2호, pp. 31-38, 1999
- 김상화, '사각컵 디프 드로잉 공정의 성형성에 관한 연구,' 서울산업대학교 석사학위논문, 1999
- 박동환, 최병근, 박상봉, 강성수, '타원형 디프 드로잉 공정에서 블랭크 형상 최적화에 관한 실험적 연구,' 한국정밀공학회지, 제16권, 제10호, pp. 101-108, 1999
- 강명순 역, '소성공학,' 청문각, 1993
- 이동녕, '소성가공학,' 문운당, 1992
- 최선순, '사각통 디프 드로잉의 펀치하중 예측과 성형인자에 관한 연구,' 부산대학교 석사학위논문, 1985
- Z. Marciniak, Warsaw, J. L. Duncan and Auckland 'Mechanics of sheet metal forming,' Edward Arnold, 1992
- S. Kapinski, 'Analytical and experimental analysis of deep drawing process for bimetal elements,' J. of Mat. Proc. Tech., Vol. 60, pp. 197-200, 1996 https://doi.org/10.1016/0924-0136(96)02328-X
- D. K. Min, B. H. Jeon, H. J. Kim and N. S. Kim, 'A study on process improvements of multistage deep drawing by the finite element method,' J. of Mat. Proc. Tech., Vol. 54, pp. 230-238, 1995 https://doi.org/10.1016/0924-0136(94)01775-1
- E. Ceretti, C. Giardini and G. Maccarini, 'Theoretical and experimental analysis of non-axisymmetrical deep drawing,' J. of Mat. Proc. Tech., Vol. 54, pp. 375-384, 1995 https://doi.org/10.1016/0924-0136(94)01768-9
- C. C. Tai, J. C. Lin, 'The optimisation deep-draw clearance design for deep-draw dies,' Int. J. Adv. Manuf. Tech., Vol. 14, pp. 390-398, 1998 https://doi.org/10.1007/BF01304617
- Daw-Kwei Leu, Tsung-Chia Chen and You-Min Huang, 'Influence of punch shapes on the collar-drawing process of sheet steel,' J. of Mat. Proc. Tech., Vol. 88, pp. 134-146, 1999 https://doi.org/10.1016/S0924-0136(98)00385-9
- F. Vollertsen, R. Breede and K. Lange, 'A method for deep drawing with multiple elastomer membranes,' Annals of the CRIP, Vol. 48, pp. 221-226, 1999 https://doi.org/10.1016/S0007-8506(07)63170-9