The Transactions of the Korean Institute of Electrical Engineers C (대한전기학회논문지:전기물성ㆍ응용부문C)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Fabrication of the Superconducting Flux Flow Transistor Using the ICP Etching Method

ICP 장치를 이용한 초전도 자속 흐름 트랜지스터의 링크 제작

  • Published : 2001.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of accelerated Ultraviolet (UV) radiation on High temperature vulcanized (HTV), Room temperature vulcanized (RTV) silicone rubber and two types of ethylene propylene diene terpolymer (EPDM) used for composite insulator were investigated by hydrophobicity class (HC), surface voltage decay after corona charging, SEM-ES, FTIR and XPS. The contact angle in two kinds of silicone rubber was scarcely change, but EPDM occurred to the loss of hydrophobicity followed by surface cracking and chalking. The surface voltage decay on UV-treated silicone rubber and EPDM showed a different decay trend with UV treatment. EDS and XPS analysis indicated that the oxygen content increased with UV treatment time in all samples. For silicone rubber, the oxidized groups of inorganic silica-like structure increased with UV treatment time. The oxidized carbon of C=O, O=C-O in EPDM increased. These oxidized surface for each material had different electrostatic characteristics, so deposited charges were expected to have different impacts on their surface hydrophobicity. The degradation mechanism based on our results was discussed.

Keywords

References

  1. Shigeki Sakai 'Theoretical study of electric field effects in high-Tc oxide superconductor using an ultrathin-metal-insulator superlattice model' Physical Review B, vol. 47, No. 14, pp 9042-9047, April 1993 https://doi.org/10.1103/PhysRevB.47.9042
  2. T. Fujii, Ken Sakuta, T. Awaji, Ken-ichi Matsui, T.Hirano, Y. Ogawa, T. Kobayashi, 'Metal-insulator-superconductor field effect transistor' Jpn. J. Appl. Phys, Vol. 31, No. 5B, pp L612-L615, May 1992 https://doi.org/10.1143/JJAP.31.L612
  3. Q.Huang, N.Yoshikawa and M.Sugahara, 'Fabrication and characterization of HTS/semiconductor three terminal' IEEE Trans. on applied suprcon, vol. 3, No.1, pp. 1957 - 1960, march 1993 https://doi.org/10.1109/77.233576
  4. D.J. Frank, M.J.Brady and A. Davidson, 'A new superconducting-base transistor' IEEE trans. on mag., vol. Mag-21, No.2, pp. 721 -724, March 1985 https://doi.org/10.1109/TMAG.1985.1063733
  5. J.S.Martens et al., 'S parameter measurements and microwave applications of superconducting flux flow transistors.' IEEE Trans. Microwave Theory Tech., vol. 39, pp 2018-2025, December, 1991 https://doi.org/10.1109/22.106541
  6. J.S.Martens et al., 'S parameter measurements and microwave applications of superconducting flux flow transistors.' IEEE Trans. Microwave Theory Tech., vol. 39, pp 2018-2025, December, 1991 https://doi.org/10.1109/22.106541
  7. 강형곤, 임성훈, 임연호, 한윤봉, 황종선, 한병성 '새로운 ICP장치를 이용한 고온 초전도체의 Dry etching 과 Wet etching 기술과의 비교' KIEEM vol.14, No.2, pp 158 Feb. 2001
  8. 강형곤, 임성훈, 박성진, 한병성 'MPMG법을 이용한 YBaCuO 초전도체의 임계특성에 영향을 미치는 파라미터' KIEE Vol. 48c, NO.4, pp221-225, Apr. 1999