DOI QR코드

DOI QR Code

발포 배율의 향상을 위한 금형 시스템의 공리적 설계

Axiomatic Design of Mold System for Advance of Foaming Magnitude

  • 발행 : 2001.04.01

초록

Polymer materials have a lot of merits including the low cost and the easiness of forming. For these reasons they are widely using at many manufacturing industries. Microcellular foaming process appeared at MIT in 1980s to save a quantity of material and increase mechanical properties. There are many process variables in appling microcellular foaming process to the conventional injection molding process. They can be solved by using Axiomatic Design Method which is very useful design method for designing a new product. Its main character is scientific and analytical. The information about the thickness of cavity plays an important role in making an effective foam. The goal of this research is to design mold system for advance of foaming magnitude with axiomatic design method. There is a relation between the change of cavitys thickness and foaming magnitude made after inserting a gas. R/t is a conception that indicate proportion between radius and thickness of cavity in mold system. By means of SEM observation of side surface of cavity sample, foaming magnitude of polymer in microcellular foaming process is decreasing gradually as the value of R/t is increasing. In this paper, an advanced mold system was presented by mapping the relation between functional requirements and design parameters.

키워드

참고문헌

  1. 1997, '플라스틱 사이언스,' 한국 플라스틱 기술 정보 센타, 통권151호, 제8호, pp. 104-130
  2. Sung Woon Cha, 1994, 'A Microcellular Foaming/Forming Process Performed at Ambient Temperature and a Super Microcellular Foaming Process,' M.I.T., pp. 20-96
  3. M. G. Moon, 1980, 'Axiomatic Approach to Engineering Design,' M.I.T., pp. 62-68
  4. Nam P. Suh, 1990, 'The Principles of Design,' The Oxford University Press, pp. 25-154
  5. 정필중, 차성운, 황윤동, 1999, 'Axiomatic Approach를 이용한 PCS 신모델 개발,' 대한기계학회 춘계학술대회 논문집 A권, pp. 524-529
  6. 문용락, 차성운, 이정욱, 1999, '공리적 접근을 이용한 아이디어 제품 개발,' 대한기계학회 춘계학술대회논문집 A권, pp. 542-547
  7. 문병기, 차성운, 오세웅, 2000, '초미세 발포성형 고분자 물질의 열전달 모델링,' 대한기계학회 춘계학술대회논문집 B권, pp. 367-372
  8. 문용락, 차성운, 강영주, 1999, '정보의 공리를 이용한 사출기 정보량 측정,' 대한기계학회 추계학술대회논문집 A권, pp. 1134-1138
  9. William W. Tice, 1976, 'The Application of Axiomatic Design Rules to an Engine Lathe Case Study,' M.I.T., pp. 45-76
  10. 조용회, 1999, '다재 사출 성형품 및 금형 설계를 위한 전문가 시스템 개발에 관한 연구,' 연세대학교 대학원 기계공학과, pp. 20-54
  11. 차성운, 문용락, 1998, '고밀도 HDD 개발을 위한 HDD Suspension의 공리적 설계,' 한국정밀공학회 춘계학술대회 논문집(Ⅱ), pp. 719-723
  12. Dominick V. Rosato and Donald V. Rosato, 1986, 'Injecton Moding Handbook : the Complete Molding Operation : Technology, Performance, Economics,' New York : Van Nonstrand Reinhold, pp. 34-105