대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제25권4호
  • /
  • Pages.564-573
  • /
  • 2001
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

단섬유강화 복합재료에서 사출측/금형측 노즐 크기 변화에 따른 섬유손상 및 기계적 성질

The Fiber Damage and Mechanical Properties of Short-fiber Reinforced Composite Depending on Nozzle Size Variations in Injection/Mold Sides

  • 발행 : 2001.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The mechanical properties of short carbon/glass fiber reinforced polypropylene are experimentally measured as functions of fiber content and nozzle diameter. Also, these properties are compared with the survival rate of reinforced fibers and fiber volume fraction using image analysis after pyrolytic decomposition. The survival rate of fiber aspect ratio as well as fiber volume fraction is influenced by injection processing condition, the used materials and mold conditions such as diameter of nozzle, etc. In this study, the survival rate of fiber aspect ratio is investigated by nozzle size variations in injection/mold sides. It is found that the survival rate of glass fiber is higher that the survival rate of glass fiber is higher than that of carbon fiber. Both tensile modulus and strength of short-fiber reinforced polypropylene are improved s the fiber volume fraction and nozzle diameter are increased.

키워드

참고문헌

  1. Kelly, A. and Tyson, W. R., 1965, 'Tensile Properties of Fiber-Reinforced Metals : Copper/Tungsten and Copper/Molybdenum,' J. Mech. Phys. Solids, Vol. 13, pp. 329-350 https://doi.org/10.1016/0022-5096(65)90035-9
  2. Hancock, P. and Cuthbertson, R. C., 1970, 'The Effect of Fibre Length and Interfacial Bond in Glass Fibre-Epoxy Resin Composites,' J.Mater Sci. 5, pp. 762-768 https://doi.org/10.1007/BF00562162
  3. Bowyer, W. H. and Bader, M. G., 1972, 'On the Reinforcement of Thermoplastics by Imperfectly Aligned Discontinuous Fibres,' J. Mater. Sci, 7, pp. 1315-1321 https://doi.org/10.1007/BF00550698
  4. Ohsawa, T. Nakayama, A. Miwa, M. and Hasegawa, A., 1978, 'Temperature Dependence of Critical Fiber Length for Glass Fiber-Reinforced Thermosetting Resin,' J. Appl. Polym. Sci, Vol. 22, pp. 3203-3212 https://doi.org/10.1002/app.1978.070221115
  5. Miwa, M. Ohsawa, T. and Tahara, K., 1980, 'Effect of Fiber Length on the Tensile Strength of Epoxy/Glass Fiber and Polyester/Glass Fiber Composites,' J. Appl. Polym. Sci, Vol. 25, pp. 795-807 https://doi.org/10.1002/app.1980.070250508
  6. Turkovich, R. V. and Erwin, L., 1983, 'Fiber Fracture in Reinforced Thermoplastic Processing,' Polym. Eng. Sci, Vol. 23, No. 13, pp. 743-749 https://doi.org/10.1002/pen.760231309
  7. Silverman, E. M., 1987, 'Effect of Glass Fiber Length on the Creep and Impact Resistance of Reinforced Thermoplastics,' Polym. Composites, Vol. 8, No. 1, pp. 8-15 https://doi.org/10.1002/pc.750080103
  8. Fischer, G. and Eyerer, P., 1988, 'Measuring Spatial Orientation of Short Fiber Reinforced Thermoplastics by Image Analysis,' Polym. Composites, Vol. 9, No. 4, pp. 297-304 https://doi.org/10.1002/pc.750090409
  9. Spahr, D. E. Friedrich, K. Schultz, J. M. and Bailey, R. S., 1990, 'Microstructure and Fracture Behaviour of Short and Long Fiber-Reinforced Polypropylene Composites,' J. Mater. Sci, 25, pp. 4427-4439 https://doi.org/10.1007/BF00581104
  10. Landis, C. M. Mcglockton, M. A. and Mcmeeking, R. M., 1999, 'An Improved Shear Lag Model for Broken Fibers in Composite Materials,' J. Composite Material, Vol. 33, No. 7, pp. 667-680 https://doi.org/10.1177/002199839903300704
  11. Fu, S. Y. Lauke, B. Mader, E. Hu, X. and Yue, C. Y., 1999, 'Fracture Resistance of Short-Glass Fiber-Reinforced and Short-Carbon Fiber-Reinforced Polypropylene under Charpy Impact Load and its Dependence on Processing,' J. Materials. Processing Technology, 89-90, pp. 501-507 https://doi.org/10.1016/S0924-0136(99)00065-5
  12. Inberg, J. P. F. Hunse, P. H. and Gaymans, R. J., 1999, 'Long Fiber Reinforcedment of Polypropylene/Polystyrene Blends,' Polym. Eng. Sci, Vol. 39, No. 2, pp. 340-346 https://doi.org/10.1002/pen.11420
  13. Nabi, Z. U. and Hashemi, S., 1998, 'Influence of Short Glass Fibers and Weldlines on the Mechanical Properties of Injection-Moulded Acrylonitrile-Styrene acrylate copolymer,' J. Mater. Sci, 33, pp. 2985-3000 https://doi.org/10.1023/A:1004362915713
  14. Dong-Joo Lee., 1996, 'On Studies of Tensile Properties in Injection Molded Short Carbon Fiber Reinforced PEEK Composite,' KSME Journal, Vol. 10, No. 3, pp. 362-371
  15. Gibson, R. F., 1994, 'Principles of Composite Material Mechanics,' McGraw-Hill, pp. 156-189
  16. Hui, C. Y. and Shia, D., 1998, 'Simple Formulae for the Effective Moduli of Unidirectional Aligned Composites,' Polym. Eng. Sci, Vol. 38, No. 5, pp. 774-782 https://doi.org/10.1002/pen.10243
  17. Annual Handbook of ASTM Standard, 1995, 'Standard Test Method for Tensile Properties of Plastics,' ASTM D638M-93, pp. 59-67
  18. Truckenmuller, F. and Fritz, H. G., 1991, 'Injection Molding of Long Fiber-Reinforced Thermoplastics : A Comparision of Extruded and Pultruded Materials with Direct Addition of Roving Strands,' Polym. Eng. Sci, Vol. 31, No. 18, pp. 1316-1329 https://doi.org/10.1002/pen.760311806