한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

볼 엔드밀에 의한 자유곡면의 정밀가공특성

Precision Machining Characteristics in Ball-end Milling of Sculptured Surfaces

  • 김병희 (강원대학교 기계메카트로닉스공학부)
  • 발행 : 2001.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the study on the cutting characteristics in ball-end milling process. First of all, the effects of the geometric cutting conditions such as the cutting speed, feedrates and the path interval on the surface integrity were evaluat-ed by the analytical and the experimental approaches. Secondly, the cutting mechanism model was developed to predict the cutting force accurately. It is possible for the proposed model to predict the shape error, estimate system stability and build the reliable adaptive control system. A large amount of experimental set are performed to show the validities of the proposed theories and to investigate the effect of cutting geometry such as rubbing effects, burr effects and etc.

키워드

참고문헌

  1. Int. J. Mach. Tool Des. Res. v.22 no.1 The prediction of cutting forces in end milling with application to comering cuts W.A. Kline;R.E.DeVor
  2. Int. J. Mach. Tool Design Research. v.23 Cutting forces in down milling A. Sabberwal
  3. Annals of CIRP v.37 no.1 A Method for Cutting Force Evaluation of End Mills A. Ber
  4. Trans. ASME v.63 An analysis of the milling process M.E. Martellotti
  5. J. of Eng. for Industry v.106 A mechanistic model for the prediction of the force system in face milling operation H.J. Fu;R.E. DeVor;S.G.Kapoor
  6. J. of Eng. for Industry v.104 The Prediction of Surface Accuracy in End Milling W.A. Kline;R.E. DeVor;I.A. Shareef
  7. JSPE v.48 no.5 Relation between Cutting Force Curve and Working Accuracy with Ball-Nose End Mills Y. Fujii;H. Iwabe
  8. Int. J of Mach. Tools Manufact. v.31 The Prediction of Cutting Forces in Ball-end Milling M. Yang;H.Park
  9. J. of Eng. For Industry v.108 Dynamics of High-speed Milling J. Tlusty
  10. J. of Eng. For Industry v.112 Update on High-speed Milling Dynamics S. Smith;J. Tlusty
  11. J of JSPE v.46 A Theoretical Analysis of Cutting Speed Components on the Rake Face of Circular Cutting Edge Ball End Mill T. Kishinami(et al)
  12. 대한기계학회논문집 v.9 no.4 원추팁 볼 엔드밀의 3차원곡면 절삭력계에 관한 연구 박천경;맹희영
  13. Int. J. Mach. Tools Manufact v.34 no.5 The prediction of cutting forces in the ball-end milling process-I. Model formulation and model building procedure H.Y. Feng;C.H. Menq
  14. Int. J. Mach. Tools Manufact. v.35 no.8 The prediction of dimensional error for sculptured surface productions using the ball-end milling process-I. Chip geometry and cutting force prediction E.M. Lim;H.Y. Feng;C.H. Meng;Z.H. Lin
  15. Int. J. Mach. Tools Manufact. v.35 no.8 The prediction of dimensional error for sculptured surface productions using the ball-end milling process-II. Surface generation model and experimental verification E.M. Lim;H.Y.Feng;C.H. Meng;Z.H. Lin
  16. 한국정밀공학회논문집 v.14 no.3 Zmap을 이용한 임의의 절삭영역에서 볼 엔드밀의 절삭력 예측 김규만;조필주;김병희;주종남
  17. 한국정밀공학회논문집 v.12 no.3 3축머시닝센터와 치구를 이용한 금형의 정밀가공시의 특성해석 김병희;주종남