References
- 日本電氣學會, '不燃性, 燃性變壓器の現狀とその動向', 電氣學會技術報告 第456?, pp. 30-60, 1993. 4
- H. Masahiro et al., 'Insulating Characteristics of SF6 Small Gaps against Lightning Impulse Voltages', T.IEE Japan, Vol. 109-A, No.6, 1989
- T. Inoue et al., 'Dielectric Characteristics of Turn-to-To Insulation Models of Gas-Insulated Transformer under Very Fast Transient Voltages', T.IEE Japan, Vol. 116-B, No. 10, 1996
- A. Inui et al., 'Characteristics of Partial Discharge in SF6 Gas Wedge Gap', T IEE Japan, Vol. 110-A, No. 2, 1990
- K. Goto et al., 'Development of Insulation Technology for High-voltage Gas Insulated Transformer', IEEE Trans. on Power Delivery, Vol. 4, No.2, April 1989 https://doi.org/10.1109/61.25591
- Y. Matsubara et al., 'Partial Discharge of the Windings of SF6 Gas Insulated Transformer and Monitoring System', 日新電機技?, Vol. 39, No.2, 1994. 7
- '不平等電界沿面放電特性'. 電氣學會技術報告(II부), No.184, 1985
- T.Nitta et al., 'Voltage-Time Characteristics of Electrical Breakdown in SF6', IEEE Trans. vol, PAS-94, No. 1, pp, 108-115, 1975
- SF6 ガス V-t 特性 調査專門委員會, 'SF6 ガスの短時間領域 V-t 特性', 電技學會技術報告 II 部 第206?, 1986
- 선종호 외, '장시간 절연체 열화실험을 위한 부분방전 측정기술 연구' , 전기학회논문지 제 49C권 12호, 2000
- 'Partial discharge measurements', IEC 60270, 2000
- 'Standard Test Method for Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies ', ASTM D 149-97a
- 'High-voltage test technoques.Part 1:General definitions and test requirements', IEC 60060-1, 1989
- '노맥스절연지 NOMEX 410호', 듀폰한국지사
- E. Husain, R, S. Nema, 'Analysis of Paschen Curves for Air, N2, and SF6 using the Townsend Breakdown Equation', IEEE Trans. on Electrical Insulation Vol. EI-17 No.4, Aug. 1982 https://doi.org/10.1109/TEI.1982.298506
- T.W.Dakin er al., 'Breakdown of Gases in Uniform Fields Paschen Curves for Nitrogen, Air and Sulfur Hexafluoride', ELECTRA Study Committe No. 15, 1972
- A. Krivda, 'Recognition of discharges', Delft Univ., pp. 107-153, 1995
- E. Takahashi et al., 'Development of Large Capacity Gas Insulated Transformer', IEEE Trans. on Power Delivery, Vol. 11, No.2, April 1996 https://doi.org/10.1109/61.489349
- IEC 60060-2, 'High Voltage Test Techniques', 1994