A Study on Estimate of Flow Coefficient with Variation of Hole Number in Multi-hole Diesel Nozzle

다공 디젤노즐의 홀수 변화에 따른 우량계수 평가에 관한 연구

  • 이지근 (전북대학교 국책지원사업단) ;
  • 조원일 (전주공업대학 기계과) ;
  • 노병준 (전북대학교 기계공학부)
  • Published : 2001.05.01

Abstract

This experimental study is to investigate the flow characteristics of the multi-hole nozzle used in the fuel injection system of a heavy-duty diesel engine. A multi-hole diesel nozzle with a 2-spring nozzle holder was used in this study and without changing the total orifice exit area, its hole number varied from 3($d_n$=0.42mm) to 8($d_n$=0.25mm). The injection pressure and needle lift were measured and Bosch type injection rates measurement system was used. The discharge flowrates of each orifice in the multi-hole nozzle changed by the flow conditions inside the nozzle sac hole. In case that pump speed and injection quantity were low, the orifice located in the vertex of nozzle tip had a great deal of injection quantity compared with that of others. As the increment of multi-hole number, the injection duration and the mean injection pressure decrease. The mean and peak injection rates, however, increase. Actually, the mean flow coefficient(${C_d}_{(mean)}$) increases, too. The flow coefficient of the multi 8 hole was evaluated as Cd(mean)=0.74 and that is the maximum value among the examined conditions.

Keywords