References
- Chandra, P. R., Han, J. C. and Lau, S. C., 1988, 'Effect of Rib Angle on Local Heat/Mass Transfer Distribution in a Two-Pass Rib-Roughened Channel,' ASME J. of Turbomachinery, Vol. 110, pp. 233-241
- Han, J. C., Chandra, P. R., and Lau, S. C., 1988, 'Local Heat/Mass Transfer Distributions Around Sharp 180 deg. Turns in Two-Pass Smooth and Rib-Roughened Channels,' ASME J. Heat Transfer, Vol. 110, pp. 91-98
- Han, J. C., Ou, S., Park, J. S., and Lei, C. K., 1989, 'Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios with Rib Turbulators,' Int. J. of Heat Mass Transfer, Vol. 32, No. 9, pp. 1619-1630 https://doi.org/10.1016/0017-9310(89)90044-6
- Han, J. C. and Park, J. S., 1988, 'Developing Heat Transfer in Rectangular Channels With Rib Turbulators,' Int. J. of Heat Mass Transfer, Vol. 31, No. 1, pp. 183-195 https://doi.org/10.1016/0017-9310(88)90235-9
- Liou, T. M. and Hwang, J. J., 1993, 'Effect of Ridge Shapes on Turbulent Heat Transfer and Friction in a Rectangular Channel,' Int. J. of Heat Mass Transfer, Vol. 36, No. 4, pp. 931-940 https://doi.org/10.1016/S0017-9310(05)80277-7
- Taslim, M. E. and Spring, S. D., 1994, 'Effects of Turbulator Profile and Spacing on Heat Transfer and Friction in a Channel,' J. of Thermophysics and Heat Transfer, Vol. 8, No. 3, pp. 555-562
- 우성제, 김완식, 조형희, 1998, '사각 덕트내 요철의 각도 변화에 따른 열전달 특성', 대한기계학회논문집 B, 제22권, 제4호, pp. 530-541
- 우성제, 권혁진, 조형희, 1999, '터빈 기익 내부관 열전달 증대를 위해 설치된 요철의 형상 효과', 대한기계학회논문집 B, 제23권, 제1호, pp. 149-157
- Lau, S. C., McMillin, R. D. and Han, J. C., 1991b, 'Turbulent Heat Transfer and Friction in a Square Channel with Discrete Rib Turbulators,' ASME J. of Turbomachinery, Vol. 113, pp. 360-366
- Lau, S. C., McMillin, R. D. and Han, J. C., 1991c, 'Heat Transfer Characteristics of Turbulent Flow in a Square Channel with Angled Discrete Ribs,' ASME J. of Turbomachinery, Vol. 113, pp. 367-374
- Lau, S. C., Kukreja, R. T. and McMillin, R. D., 1992, 'Turbulent Heat Transfer in a Square Channel with Staggered Discrete Ribs,' J. of Thermophysics Heat Transfer, Vol. 6, No. 1, pp. 171-173
- Taslim, M. E., Li, T. and Kercher, D. M., 1996, 'Experimental Heat Transfer and Friction in Channels Roughened With Angled, V-Shaped, and Discrete Ribs on Two Opposite Walls,' ASME J. of Turbomachinery, Vol. 118, pp. 20-28
- Ekkad, S. V. and Han, J. C., 1997, 'Detailed Heat Transfer Distributions in Two-pass Square Channels with Rib Turbulators,' Int. J. of Heat Mass Transfer, Vol. 40, No. 11, pp. 2525-2537 https://doi.org/10.1016/S0017-9310(96)00318-3
- Chyu, M. K. and Natarajan, V., 1989, 'Local Heat Transfer on a Flat Surface Roughened with Broken Ribs,' ASME Winter Annual Meeting, San Francisco, CA, ASME-HTD, pp. 25-31
- Hu, Z. and Shen, J., 1996, 'Heat Transfer Enhancement in a Converging Passage with Discrete ribs,' Int. J. of Heat Mass Transfer, Vol. 39, No. 8, pp. 1719-1727 https://doi.org/10.1016/0017-9310(95)00199-9
- Ambrose, D., Lawrenson, I. J., and Sparke, C. H. S., 1975, 'The Vapor Pressure of Naphthalene,' J. of Chem. Thermodynam., Vol. 7, pp. 1173-1176
- Goldstein, R. J. and Cho, H. H. 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- McAdams, W. H., 1942, Heat Transmission, 2nd ed. McGraw-Hill, New York
- Petukhov, B. S., 1970, Advances in Heat Transfer, Vol. 6, Academic Press, New York, pp. 503-504
- Han, J. C. and Zhang, Y. M., 1992, 'High Performance Heat Transfer Ducts with Parallel Broken and V-shaped broken ribs,' Int. J. of Heat Mass Transfer, Vol. 35, pp. 513-523 https://doi.org/10.1016/0017-9310(92)90286-2