대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제24권2호
  • /
  • Pages.214-223
  • /
  • 2000
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

충돌 제트에 의해 형성되는 액막의 두께 특성에 관한 연구

Interferometric Measurements of the Thickness Distribution of the Liquid Sheet Formed by Two Impinging Jets

  • 추연준 (전남대학교 대학원 기계공학과) ;
  • 강보선 (전남대학교 자동차공학부)
  • 발행 : 2000.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, a study on the characteristics of the liquid sheet formed by two impinging jets is presented. Using the interference phenomena of light, the thickness of the liquid sheet, which seems to heavily affect the size of the droplets, is measured and compared with existing theoretical modelings. Thinner liquid sheet is produced with larger impinging angle, smaller orifice diameter, and higher azimuthal angle but the jet velocity doesn't affect the thickness. More viscous liquid produces thicker liquid sheet. The theoretical modelings predict the same trend as the experiments but the thickness values are overestimated at low azimuthal angles. This difference is gradually decreased as the azimuthal angle is increased: The breakup mechanism of the droplets from the liquid sheet is visualized by a high speed camera. The crest around the edge of the liquid sheet is protruded with the accumulation of liquid at the end of protuberance, which contracts into a spherical shape and then becomes detached when the stem breaks down, producing large droplets with a few small size of satellites.

키워드

참고문헌

  1. Sutton, G. P., 1992, Rocket Propulsion Element: An Introduction to the Engineering of Rockets, John Wiley & Sons, pp. 298-311
  2. Taylor, F. R. S., 1960, 'Formation of Thin Flat Sheets Of Water,' Proc. Roy. Soc. of London, Vol. 259, pp. 1-17
  3. Shen, Y., Impinging Jet Atomization at Elevated and Supercritical Ambient Conditions, 1997, Ph.D. Thesis, Univ. of Illinois at Chicago
  4. Kang, B. S., Shen, Y. B., Poulikakos, D., 1995, 'Holography Experiments in the Breakup Region of a Liquid Sheet Formed by Two Impinging Jets,' Atomization and Sprays, Vol. 5, No. 4&5, pp. 387-402
  5. Ranz, W. E., 1959, 'Some Experiments on the Dynamics of Liquid Films,' Journal of Applied Physics, Vol. 30, No. 12, pp.1950-1955 https://doi.org/10.1063/1.1735095
  6. Miller, K. D., 1960, 'Distribution of Spray From Impinging Liquid Jets,' Journal of Applied Physics, Vol. 31, pp.1132-1133 https://doi.org/10.1063/1.1735772
  7. Hasson, D. and Peck, R. E., 1964, 'Thickness Distribution in a Sheet Formed by Impinging Jets,' A.I.Ch.E. Journal, Vol. 10, pp. 752-754 https://doi.org/10.1002/aic.690100533
  8. Ibrahim, E. A. and Przekwas, A. J., 1991, 'Impinging Jets atomization,' Phys. Fluids A, Vol. 3, No. 12, pp. 2981-2987 https://doi.org/10.1063/1.857840
  9. Couto, H. S. and Bastos-Netto, D., 1991, 'Modeling Droplet Size Distribution from Impinging Jets,' Journal of Propulsion and Power, Vol. 7, No. 4, pp. 654-656
  10. Dombrowski, N. Hasson, D., and Ward, D. E., 1960, 'Some Aspects of Liquid Flow Through Fan Spray Nozzles,' Chemical Engineering Science, Vol. 12, pp. 35-50 https://doi.org/10.1016/0009-2509(60)90004-X
  11. Foster, H. H. and Heidmann, M. F., 1960, 'A Spatial Characteristics of Water Spray Formed by Two Impinging Jet at Several Jet Velocities in Quiescent Air,' NASA TN D-301