DOI QR코드

DOI QR Code

Nonlinear analysis and tests of steel-fiber concrete beams in torsion

  • Karayannis, Chris G. (Department of Civil Engineering, Democritus University of Thrace)
  • 발행 : 2000.04.25

초록

An analytical approach for the prediction of the behaviour of steel-fiber reinforced concrete beams subjected to torsion is described. The analysis method employs a special stress-strain model with a non-linear post cracking branch for the material behaviour in tension. Predictions of this model for the behaviour of steel-fiber concrete in direct tension are also presented and compared with results from tests conducted for this reason. Further in this work, the validation of the proposed torsional analysis by providing comparisons between experimental curves and analytical predictions, is attempted. For this purpose a series of 10 steel-fiber concrete beams with various cross-sections and steel-fiber volume fractions tested in pure torsion, are reported here. Furthermore, experimental information compiled from works around the world are also used in an attempt to establish the validity of the described approach based on test results of a broad range of studies. From these comparisons it is demonstrated that the proposed analysis describes well the behaviour of steel-fiber concrete in pure torsion even in the case of elements with non-rectangular cross-sections.

키워드

참고문헌

  1. Anderson, P. (1935), "Experiments with concrete in torsion", Trans. ASCE, 100, 949-983.
  2. ACI Committee 544 (1982), State-of-the-Art Report on Fibre Reinforced Concrete, Report No. 44.IR-82(Reapproved 1986), American Concrete Institute, Detroit.
  3. Belarbi, A. and Hsu, T.T.C. (1995), "Constitutive laws of softened concrete in biaxial tension-compression", ACIStructural Journal, 92(5), 562-573.
  4. Bentur, A. and Mindness, S. (1990), Fibre Reinforced Cementitious Composites, Elsevier Applied Science, NewYork.
  5. Cowan, H.J. (1965), Reinforced and Prestressed Concrete in Torsion. Edward Arnold (Publishers) Ltd., London.
  6. Craig, R.J., Parr, J.A., Germain, E., Mosquera, V. and Kamilares, S. (1986), "Fiber reinforced beams in torsion",J. ACI, 83(6), 934-942.
  7. Gopalaratnam, V.S. and Shah, S.P. (1985), "Softening response of plain concrete in direct tension", J. of A.C.I.,82(27), 310-323.
  8. Gopalaratnam, V.S. and Shah, S.P. (1987), "Tensile failure of steel fiber-reinforced mortar", J. of EngineeringMechanics, ASCE, 113, 635-652. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:5(635)
  9. Halpin J.C. and Tsai S.W. (1969), Effects of Environmental Factors on Composite Materials, AFML-TR 67-423.
  10. Hsu, T.T.C. (1984), Torsion of Reinforced Concrete. Van Nostrand Reinhold, New York.
  11. Karayannis, C.G. and Soulis, J.V. (1990), "A numerical method for torsional analysis of structural elements", J.Computers & Structures, 36(4), 755-768. https://doi.org/10.1016/0045-7949(90)90090-O
  12. Karayannis, C.G. (1995a), "Torsional analysis of flanged concrete elements with tension softening", J.Computers & Structures, 54(1), 97-110. https://doi.org/10.1016/0045-7949(94)00299-I
  13. Karayannis, C.G. (1995b), "A numerical approach to steel-fibre reinforced concrete under torsion", J. StructuralEngineering Review, 7(2), 83-91.
  14. Karayannis, C.G. (2000), "A Smeared Crack Analysis for Concrete in Torsion" Structural J. ASCE, to appear.
  15. Karayannis, C.G. and Chalioris, C. (2000), "Experimental validation of a smeared analysis for concrete intorsion", Structural J. ASCE, to appear.
  16. Lim, T.Y., Paramasivam, P. and Lee, S.L. (1987), "Analytical Model for Tensile Behavior of Steel-FiberConcrete", ACI Materials Journal, 84 (4), 286-298.
  17. Mansur, M.A. (1982), "Bending-torsion interaction for concrete beams reinforced with steel fibres", Magazine ofConcrete Research, 34(121), 182-190. https://doi.org/10.1680/macr.1982.34.121.182
  18. Mansur, M.A. and Paramasivam, P. (1985), "Fiber reinforced concrete beams in torsion, bending, and shear",ACI J., 82(2), 33-39.
  19. Nathan, G.K., Paramasivam, P. and Lee, S.L. (1987), "Tensile behavior of fiber reinforced cement paste", J.Ferrocement, 8 (2), 59-79.
  20. Wafa, F.F., Hasnat, A. and Tarabolsi, O.F. (1992), "Prestressed fiber reinforced concrete beams subjected totorsion", J. ACI, 89(3), 272-283.

피인용 문헌

  1. Improved Shear Equations for Steel Fiber-Reinforced Concrete Deep and Slender Beams vol.111, pp.4, 2014, https://doi.org/10.14359/51686736
  2. Effectiveness of the use of steel fibres on the torsional behaviour of flanged concrete beams vol.31, pp.5, 2009, https://doi.org/10.1016/j.cemconcomp.2009.02.007
  3. Shear Performance of Steel Fibrous Concrete Beams vol.14, 2011, https://doi.org/10.1016/j.proeng.2011.07.259
  4. Torsional improvement of reinforced concrete beams using ultra high-performance fiber reinforced concrete (UHPFC) jackets – Experimental study vol.106, 2016, https://doi.org/10.1016/j.conbuildmat.2015.12.160
  5. Tests of steel fibre reinforced concrete beams under predominant torsion vol.6, 2016, https://doi.org/10.1016/j.jobe.2016.02.004
  6. Torsional behavior of ultra-high performance concrete squared beams vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.05.027
  7. Analytical model for the torsional behaviour of reinforced concrete beams retrofitted with FRP materials vol.29, pp.12, 2007, https://doi.org/10.1016/j.engstruct.2007.09.009
  8. A new method for earthquake strengthening of old R/C structures without the use of conventional reinforcement vol.52, pp.2, 2014, https://doi.org/10.12989/sem.2014.52.2.391
  9. Experimental study of the torsion of reinforced concrete members vol.23, pp.6, 2006, https://doi.org/10.12989/sem.2006.23.6.713
  10. Fiber reinforced concrete L-beams under combined loading vol.14, pp.1, 2014, https://doi.org/10.12989/cac.2014.14.1.001
  11. Torsional behavior model of steel-fiber-reinforced concrete members modifying fixed-angle softened-truss model vol.45, pp.1, 2013, https://doi.org/10.1016/j.compositesb.2012.09.021
  12. Strength of prestressed concrete beams in torsion vol.10, pp.2, 2000, https://doi.org/10.12989/sem.2000.10.2.165
  13. Steel fibrous RC beams subjected to cyclic deformations under predominant shear vol.49, 2013, https://doi.org/10.1016/j.engstruct.2012.10.010
  14. Torsional responses of steel fiber-reinforced concrete members vol.129, 2015, https://doi.org/10.1016/j.compstruct.2015.04.003
  15. Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers – Experimental study vol.22, pp.1, 2008, https://doi.org/10.1016/j.conbuildmat.2006.09.003
  16. Analytical approach for the evaluation of minimum fibre factor required for steel fibrous concrete beams under combined shear and flexure vol.43, 2013, https://doi.org/10.1016/j.conbuildmat.2013.02.039
  17. Ductility Enhancement in Beam-Column Connections Using Hybrid Fiber-Reinforced Concrete vol.112, pp.2, 2015, https://doi.org/10.14359/51687405
  18. An innovative solution for strengthening of old R/C structures and for improving the FRP strengthening method vol.1, pp.3, 2014, https://doi.org/10.12989/smm.2014.1.3.323
  19. Optimum Dosage of Deformed Steel Fibres in Fibrous Concrete Beams under Predominant Shear vol.651, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.651.18
  20. Fixed-Angle Smeared-Truss Approach with Direct Tension Force Transfer Model for Torsional Behavior of Steel Fiber-Reinforced Concrete Members vol.11, pp.9, 2013, https://doi.org/10.3151/jact.11.215
  21. The Effect of Specimen Shape on the Mechanical Properties of Sisal Fiber-Reinforced Concrete vol.12, pp.None, 2000, https://doi.org/10.2174/1874149501812010368
  22. Flexural analysis of steel fibre-reinforced concrete members vol.22, pp.1, 2000, https://doi.org/10.12989/cac.2018.22.1.011
  23. Cyclic Response of Steel Fiber Reinforced Concrete Slender Beams: An Experimental Study vol.12, pp.9, 2000, https://doi.org/10.3390/ma12091398
  24. Numerical Analysis on Flexural Behavior of Steel Fiber-Reinforced LWAC Beams Reinforced with GFRP Bars vol.9, pp.23, 2000, https://doi.org/10.3390/app9235128
  25. Analysis of Residual Flexural Stiffness of Steel Fiber-Reinforced Concrete Beams with Steel Reinforcement vol.13, pp.12, 2000, https://doi.org/10.3390/ma13122698
  26. Effect of Steel Fibers on the Hysteretic Performance of Concrete Beams with Steel Reinforcement—Tests and Analysis vol.13, pp.13, 2020, https://doi.org/10.3390/ma13132923
  27. THE TORSIONAL AND SHEAR BEHAVIOR OF STEEL FIBER REINFORCED RC MEMBERS vol.14, pp.2, 2000, https://doi.org/10.21307/acee-2021-015
  28. Torsional Behavior of High Strength Concrete Members Strengthened by Mixed Steel Fibers vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/5539623
  29. Experimental Investigation of Shear Strength for Steel Fibre Reinforced Concrete Beams vol.15, pp.1, 2000, https://doi.org/10.2174/1874836802115010081
  30. Seismic Performance of Steel Fiber Reinforced High-Strength Concrete Beam-Column Joints vol.14, pp.12, 2000, https://doi.org/10.3390/ma14123235
  31. Multivariable Regression Strength Model for Steel Fiber-Reinforced Concrete Beams under Torsion vol.14, pp.14, 2000, https://doi.org/10.3390/ma14143889
  32. Experimental investigation of steel fibers effect on the cyclic behavior of flexural members with moderate ductility vol.34, pp.None, 2000, https://doi.org/10.1016/j.istruc.2021.09.022
  33. Experimental study and theoretical prediction on torsional strength with different steel fiber reinforced concretes and Cross-Section areas vol.251, pp.no.pa, 2000, https://doi.org/10.1016/j.engstruct.2021.113559