Electromagnetic Vibration Transducer Using Silicon Elastic Body For Implantable Middle Ear Hearing Aid Applications

이식형 중이 보청기에 적용 가능한 Si 탄성체로 구현된 전자기 진동 트랜스듀서

  • 이기찬 (경북대 대학원 전기공학과) ;
  • 이세규 (경북대 대학원 전기공학과) ;
  • 박세광 (경북대 전자전기공학부) ;
  • 조진호 (경북대 전자전기공학부) ;
  • 이상흔 (경북대 의과대학 이비인후과)
  • Published : 2000.10.01

Abstract

This paper presents the design and fabrication of micro electromagnetic vibration silicon elastic body characterized with small size, high efficiency and selective frequency bandwidth for Bio-MENS applications, such as implantable middle ear hearing aid. The presented electromagnetic vibration transducer that composed of wounded coil, permanent magnet and 4-beam cross type elastic body is fabricated by using of micromachining technology. The fabricated transducer has experimental characteristics, that is 5 nm/mA of an energy trasfer rate at the frequency range of 100∼2800 Hz. It has a size of $2{\times}2{\times}2.5\;mm^3$.

Keywords

References

  1. Richard L. Goode, Mary L. Rosenbaum and Anthony J. Maniglia, The History and Development of The Implantable Hearing Aid, The Otolaryngologic Clinics of North America, Vol. 28, No. 1, pp. 1-16, 1995
  2. Michael C. Pollack, Amplification for the hearing-Impaired, 3rd ed., pp. 329-339, Grune & Stratton, Inc., 1988
  3. W. H. Ko, W. L. Zhu and A. J. Maniglia, Engineering principles of mechanical stimulation of middle ear, Otolaryngologic Clinic of North America, Vol. 28, no. 1, pp. 29-41, 1995
  4. M. A. Harradine, T. S. Birch, J. C. Stevens and C. Shearwood, 'A Micro-machined Loudspeaker for The Hearing Impaired', International Conference on Solid State Sensors and Actuators, Vol. 1, pp. 429-432, 1997 https://doi.org/10.1109/SENSOR.1997.613677
  5. Timothy G. Dietz, Geoffrey R. Ball and Bob H. Katz, 'Partially Implantable Vibration Ossicular Prosthesis', International Conference on Solid State Sensors and Actuators, Vol. 1, pp. 433-436, 1997 https://doi.org/10.1109/SENSOR.1997.613678
  6. K. Srairi and M. Feliachi, 'Electromagnetic Actuator Behavior Analysis Using Finite Element and Parameterization Methods', IEEE Transactions on Magnetics, Vol. 31, No. 6, pp. 3497-3499, 1995 https://doi.org/10.1109/20.489548
  7. Peter Kohnke, User's manual, Vol. IV, ANSYS, Inc., 1994
  8. Thomas Tschan, Nico de Rooji and Alex Bezinge, 'Analytical and FEM Modeling of Piezoresistive Silicon Accelerometers: Prediction and Limitations Compared to Experiments', Sensors and Materials, Vol. 3, pp. 189-195, 1992
  9. Kijin Kwon and Sekwang Park, 'Three Axis Piezoresistive Accelerometer Using Polysilicon Layer', International Conference on Solid State Sensors and Actuators, Vol 2, pp. 1221-1224, 1997 https://doi.org/10.1109/SENSOR.1997.635428