주조 포스트코아에서 시멘트 종류가 미세누출에 미치는 영향

A Study of the Comparison of Microleakage according to the Types of Cement on the Cast Post and Core

주조 포스트코아와 치질 계면에서 시멘트 종류에 따른 미세누출의 변화를 알아보기 위해 상악 전치부 및 하악 견치, 총 40개의 단근치를 백악-법랑 경계 2mm 상방에서 절단하고 백악-법랑 경계 1mm 상방에 chamfer 변연 형성 후, 통상적 근관 형성, 및 충전을 시행하고 주조용 Parapost를 이용하여 40개의 주조 포스트코아를 제작하였다. 각 군당 10개씩 4군으로 분배하여, 실험 I군에서는 인산아연 시멘트인 Fleck's를, 실험 II군에서는 글래스아이오노머 시멘트인 Fuji I을, 실험 III군에서는 4-META계 레진 시멘트인 Superbond C & B를, 실험 IV군에서는 인산 에스테르계 레진 시멘트인 Panavia 21로 각각 접착한 다음, 500회 thermocycling 및 1% basic fuchsin 염색액 침액을 거친 후 시편을 협설면으로 절단하고 광학 현미경상에서 포스트와 치질 계면사이의 미세누출정도를 지수로 산정하여 시편 협설면의 지수 평균을 계산한 후 각 군간의 비교 분석을 통해 다음과 같은 결론을 얻었다. 1. 모든 시편의 계면에서 미세누출이 관찰되었다. 2. 실험 I군에서 실험 II군, 실험 III군, 및 실험 IV군에 비해 유의성있게 가장 높은 미세누출지수를 보였고, 실험 II군에서 실험 III군, 및 실험 IV군에 비해 유의성있게 높은 미세누출지수를 보였다(p<0.05). 3. 실험 IV군에서 가장 낮은 미세누출지수를 보였으나 실험 III군과의 통계학적 차이는 없었다(p>0.05).

The purpose of this study was to compare the microleakage at the interface of cast post and tooth according to the type of cement. Forty anterior teeth with single root were used. The teeth were cut 2 mm coronal from the cementoeamel junction and chamfer finish line was made on 1 mm coronal from the cementoeamel junction. After the routine endodontic treatment, post space was prepared using #5.5 Parapost drill to a depth of 7 mm. After the pick up impression, core building was made to 3 mm of clinical crown with burnout wax, then post and core was cast with nonprecious metal. The teeth were divided into four groups of ten each. In Group I, post and core were cemented with Fleck's(Zinc phosphate cement) In Group II, post and core were cemented with Fuji I(Glass ionomer cement) In Group III, post and core were cemented with Superbond C & B(Composite resin cement) In Group IV, post and core were cemented with Panavia 21(Composite resin cement) All cemented teeth were stored in normal saline at $37^{\circ}C$ for 7 days and thermocycled from $5^{\circ}C$ to $55^{\circ}C$ for 500 cycles with a dwell time of 30 seconds. After thermocycling, teeth were immersed in 1% Basic fuchsin dye for 48 hours. All 40 teeth were then embedded in the epoxy resin and cut buccolingually with a cutting instrument. The degree of penetration of dye at interface was graded on a scale of 0 to 4 using a stereomicroscope at 25 to 40 times magnification. Through the findings of this study, the following conclusion were obtained. 1. All the groups showed the microleakage at the interface of cast post core and tooth. 2. Group I showed the highest microleakage score among the groups with a significant difference(p<0.05). 3. Group II showed higher microleakage score than Group III and Group IV with a significant difference(p<0.05). 4. Group IV showed the lowest microleakage score but there were no significant difference with Group III(p>0.05).