추정된 절삭력 신호를 이용한 선삭력 제어

  • 발행 : 2000.05.01

초록

While a cutting tool is machining a workpiece at various cutting depth, the feedrate is usually selected based on the maximum depth of cut. Even if this selection can avoid power saturation or tool breakage, it is very conservative compared to the capacity of the machine tools and can reduce the productivity significantly. Many adaptive control techniques that can adjust the feedrate to maintain the constant cutting force have been reported. However, these controllers are not very widely used in manufacturing industry because of the limitations in measuring the cutting force signals. In this paper, turning force control systems based on the estimated cutting force signals are proposed. A synthesized cutting force monitor is introduced to estimate the cutting force as accurately as a dynamometer does. Three control strategies of PI, adaptive and fuzzy logic controllers are applied to investigate the feasibility of utilizing the estimated cutting force fur turning force control. The experimental results demonstrate that the proposed systems can be easily realized in CNC lathe with requiring little additional hardware.

키워드

참고문헌

  1. Spiewak, S.A., 'Acceleration based indirect force measurement in metal cutting processes,' Int. J. Mach. Tools Manufact., Vol. 35, No. 1, pp. 1-17, 1995 https://doi.org/10.1016/0890-6955(95)80005-0
  2. Shiraish, M. and Aoshima, S., 'Sensorless in-process measurement of instantaneous depth of cut and cutting force in turning,' Proc. American Control Conf., pp. 155-159, 1997 https://doi.org/10.1109/ACC.1997.611774
  3. Huh, K., Jung, J. and Lee, K., 'A Cutting Force Monitering System based on AC spindle Drive,' Proceedings of the American Control Conference, pp. 3013-3017, 1998 https://doi.org/10.1109/ACC.1998.688410
  4. UIsoy, A. G., Koren, Y. and Rasmussen, F., 'Principal developments in the adaptive control of machine tools,' ASME J. Dynamic Syst. Measurement and Control, Vol. 105, No. 2, pp. 107-112, 1983
  5. 김기태, 권원태, 주종남, '주축모터 전류를 통한 절삭력의 간접 측정 및 절삭력 추종 제어,' 한국정밀공학회지 제14권 제10호, pp. 15-27, 1997
  6. Tomizuka, M. and Zang, S., 'Modeling and conventional / adaptive PI control of a lathe cutting process,' ASME J. Dynamic Syst. Measurement and Control, Vol. 110, No. 4, pp. 350-354, 1988
  7. Daneshmend, L.K. and Pak, H.A., 'Model reference adaptive control of cutting force turning,' ASME J. Dynamic Syst. Measurement and Control, Vol. 180, No. 3, pp. 215-222, 1986
  8. Hwang, C.L., 'Adaptive turning force with optimal robustness and constrained feed rate,' Int. J. March. Tools Manufact., Vol. 33, No. 3, pp. 483-493, 1993 https://doi.org/10.1016/0890-6955(93)90054-X
  9. Huang, S. and Chiou, K., 'The application of neural networks in self-tunning constant force control,' Int. J. March. Tools Manufact, Vol. 36, No. 1, pp. 17-31, 1996 https://doi.org/10.1016/0890-6955(95)92626-A
  10. Carillo, F.J. and Rotella, F., 'A robust adaptive controller for constant turning force regulation,' Control Eng. Practice, Vol. 5, No. 12, pp. 1673-1682, 1997 https://doi.org/10.1016/S0967-0661(97)10021-1
  11. Hsu,P.and Fann,W.,'Fuzzy adaptive control of machining processes with a self-learning algorithm,' ASME J.Manufact.Sci.Eng., Vol. 118, No. 4, pp. 522-530, 1996
  12. Nassa, S.A. and Unnewehr, L.E., Electromechanics and Electric Machines, 2th Ed., John Wiley and Sons, 1983
  13. Koren, Y., 'Control of Machine Tools,' Journal of Manufacturing Science and Engineering, Vol. 119, pp. 749-753, 1997
  14. Lin, S.B. and Masory, O., 'Gains Selection for a Variable Gain Adaptive Control System for Turning,' ASME J. Eng. Industry, Vol. 109, No. 4, pp. 399-403, 1987
  15. Lin, C.T. and Lee, C.S.G, Neural Fuzzy systems, Prentice Hall, 1996