Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

자동차용 충격흡수기의 튜브 스피닝 공정 해석

  • Published : 2000.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In process of tube spinning far shock absorber on vehicles, the selection of feed rate and rounding radius of forming roller and revolution speed of tube and forming roller, forming gap between die and forming roller are very important factors to obtain the optimal process result. In this paper, rigid-plastic FEM and UBET analysis are applied to verify effect of each factors by forming load. We can obtain the optimal conditions to prevent defects during processing.

Keywords

References

  1. 박재우, 신상윤, 주동우, 이시복, 자동차용 충격 흡수기의 동적거동 해석,, 추계 한국정밀공학회, 학술대회 논문집, pp. 362-370, 1996
  2. 박재우, 신상윤, 주동우, 이시복, 충격흡수기의 동적거동 해석 프로그램을 이용한 각 파라미터가 댐핑력에 미치는 영향 조사, 추계 한국정밀 공학회 학술대회 논문집, pp. 371-376, 1996
  3. 김학봉, 나기웅, 항공기 착륙장치 완충기의 전산유체역학을 이용한 유량계수 예측 및 동특성 해석, 항공산업기술연구소 연구지, 제6집, 한국항공대학교, 1996
  4. Peterson, R. R., 'Hydraulic Applied to the Automobile Suspension,' Proceedings of the National Conference of Industrial Hydraulics, Vol. 7, pp. 23-43, May 1953
  5. Hoffmann, H. J., 'Effectiveness of Shock absorbers on Vehicles,' Automibilitechnische Zeitschrift, Jahrg. 60, Heft 10, Seite 289, Oktuber 1958
  6. Lang, Harold Harvey., 'A Study of the Characteristics of Automotive Hydraulic Dampers at High Stroking Frequencies,' Ph. D. Dissertation, University of Michigan, 1977
  7. M. Hayama., 'An analysis of working force in Shear Spinning,' Bulletin of the Faculty of Engineering, Yokohama Nat Univ., Vol. 26, pp. 99, 1977
  8. K, Manabe, 傾斜工具による圓管の壓縮加工の解析, Journal of the JSTP, Vol. 29, pp. 163-170, 1988
  9. D. M. Himmelblau, 'Applied Nonlinear Programming,' McGraw-HILL, pp. 345-359, 454-468