Effect of Intercritical Annealing on the Dynamic Strain Aging(DSA) and Toughness of SA106 Gr.C Piping Steel

  • 발행 : 2000.02.01

초록

It is reported that the toughness and safety margins of the SA106 Gr.C main steam line piping steel is reduced due to dynamic strain aging (DSA) at the reactor operating temperature for Leak-Before-Break (LBB) application. In this study, intercritical annealing in two-phase ($\alpha$+${\gamma}$)region was performed to investigate the possibility of improving the toughness and reducing DSA susceptibility. The manifestations of DSA were still observed in the tensile tests of the annealed specimens. However, the ductility loss caused by DSA was smaller than that in the as-received material. Furthermore, the intercritical annealing was able to increase the Charpy impact toughness by 1.5 times compared to as-received. With the heat treatment, we could obtain microstructural changes such as the cleaner retained ferrite, increased ferrite content and somewhat finer grain size. It is considered that the reduced DSA was induced by cleaner retained ferrite, which in turn resulted in higher impact toughness in addition to the general toughening due to finer grain sizes and increased ferrite content.

키워드

참고문헌

  1. D. O. Harris, E. Y. Lim, and D. D. Dedhia, NUREC/CR-2189, 5, Nuclear Regulatory Commission (1981)
  2. C. W. Marschall, R. Mohan, P. Krishnaswarny and G. M. Wilkowski, NUREG/CR-6226, October (1994)
  3. J. W. Kim, and I. S. Kim, Nuclear Engineering and Design, 172, PP. 49-59 (1997) https://doi.org/10.1016/S0029-5493(97)00045-9
  4. A. R. Rosenfield et al, Dislocation Dynamics, pp. 381, McGrow-Hill, New York (1968)
  5. R. E. Reed-Hill. The Inhomogenity of Plastic Deformation, pp. 191, ASM, Metal Park., Ohio (1973)
  6. J. D. Baird, Metallugical Reviews, 16, 1, (1971)
  7. W. C. Lesile and R. L Rickett, Trans. of AIME, Aug., pp. 1021 (1953)
  8. B. Russel, Philos. Mag., 8, pp. 615 (1963) https://doi.org/10.1080/14786436308211160
  9. J. J. Yi and I. S. Kim, Scripta METALLURGICA, 17, pp. 299-302 (1983) https://doi.org/10.1016/0036-9748(83)90161-8
  10. R. D. Lawson, et al., Metallography, 13, pp. 71 (1980) https://doi.org/10.1016/0026-0800(80)90023-3
  11. K. W. Andrews, JISI, 203 (7), July, pp. 721-727 (1965)
  12. J. B. Gilmour et al., Met. Trans., 3, pp. 1455-1464 (1972) https://doi.org/10.1007/BF02643033
  13. S. W. Thomson, P. R. Howel, Mater. Sci. Technol., 8, pp. 777-784 (1992)
  14. C. Thaulow, et al., Eng. Fracture Mech., 24, pp. 263-276 (1986) https://doi.org/10.1016/0013-7944(86)90057-3
  15. Matlock, D. K., et al., Structure and Properties of Dual-Phase Steels, pp. 62-90, AIME, New York (1979)
  16. C. C. Li and W. C. Leslie, Metall. Trans. A. 9A, pp. 1765 (1978) https://doi.org/10.1007/BF02663406
  17. R. A. Kot, et al., Fundmentals of Duel-Phose Steels, AIME (1981)
  18. A. H. Cottrell, Dislocation and Plastic Flow in Crystals, Clarendon Press, Oxford (1953)
  19. A. H. Cottrell, Philos. Mag., 74, pp. 829, (1953)
  20. P. G. McCormick, Acta Mettall., 20, pp. 351 (1972) https://doi.org/10.1016/0001-6160(72)90028-4
  21. P. G. McCormick, Scripta Mettall., 7, pp. 945 (1973) https://doi.org/10.1016/0036-9748(73)90146-4
  22. J. T. Barnby, Acta Metall., 15, pp. 903 (1967) https://doi.org/10.1016/0001-6160(67)90372-0
  23. K. E. Puttick, Phil. Mag., 4, pp. 964 (1959) https://doi.org/10.1080/14786435908238272