Journal of Mechanical Science and Technology

  • 제14권12호
  • /
  • Pages.1319-1327
  • /
  • 2000
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Analysis of Dynamic Characteristics of Structural Joints Using Stiffness Influence Coefficients

  • Lee, Sin-Young (School of Mechanical Engineering, Kunsan National University) ;
  • Ko, Kang-Ho (Tecnical Center, Daewoo Motor Co.) ;
  • Lee, Jang-Moo (School of Mechanical and Aeronautical Engineering, Seoul National Unversity)
  • 발행 : 2000.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. Grosse I.R., Mitchell L.D., 1990, 'Nonlinear Axial Stiffiness Characteristics of Axisymmetric Bolted Joints Journal of Mechanical Design, Vol.112, pp. 442-449
  2. Guyan R.J., 1965, 'Reduction of Stiffiness and mass Matrix,' AIAA J., Vol.3, pp.380
  3. Ko K.H., 1996, Analysis of the Dynamic Characteristics of Structural Joints Using stiffness Influence Coefficients, Seoul National University Ph.D.Thesis
  4. Lee, J.W., Ko K.H., Lee, S.I., Kim S.G.,and Lee, J.M., 1995, 'A Dynamic Analysis of Complex Stuctures with Joints,' Proceedings of the 13th Int.Modal Analysis Conf., pp. 331-337
  5. Lee, S.Y. and Lee, J.M., 1990, 'Dynamic Analysis of Structures with Nonliner-Joints by Using Substructure Method,' Trans.of KSME, Vol.14, pp. 324-330
  6. Meirovitch, L., 1967, Analytical Methods in Vibrations, Macmillan
  7. Moon, B., Kim, J.W. Yang B.S., 1999, 'Non-Linear Vibration Analysis of Mechanical Sturcture System Using Substructure Synthesis Method,' KSME International Journal, Vol. 13, pp. 620-629
  8. Tanaka, M., Miyazaya, H., Asaba, E., and Hongo, K., 1981, 'Application of the Finite Element Method to Bolt-nut Joints, Bulletin of JSME, Vol. 24, pp. 1064-1071
  9. Tsai, J.S. and Chou, Y.F., 1988., 'The Identification of Dynamic Characteristics of a Single bolt Joint' Journal of Sound and Vibration, Vol. 125 pp. 487-502 https://doi.org/10.1016/0022-460X(88)90256-8
  10. Wang, J.H. and Liou, C.M., 1991, 'Experimental Identificatio of Mechanical Joint Parameters,' Journal of Vibration and Acoustics, Vol. 113, pp. 28-36
  11. Yoon, D.H., Jo, S.H., Kim, E.G., 1999, 'Three-Dimensional Flow Analysis for Compression Molding of Unidirectional Fiber-Reinforced Polymeric Domposites with Slip Between Mold and Material,' Trans. of KSME, Vol. 23, pp. 1075-1084