Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Numerical Analysis on the Freeze Coating of a Non-Isothermal Flat Plate with a Binary Alloy

비등온 평판의 이성분 합금 냉각코팅에 관한 수치해석

  • Published : 2000.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

A numerical analysis on the freeze coating process of a non-isothermal finite dimensional plate with a binary alloy is performed to investigate the growth and decay behavior of the solid and the mushy layer of the freeze coat and a complete procedure to calculate the process is obtained in this study. The continuously varying solid and mushy layers are immobilized by a coordinate transform and the resulting governing differential equations are solved by a finite difference technique. To account for the latent heat release and property change during solidification, proper phase change models are adopted. And the convection in the liquid melt is modeled as an appropriate heat transfer boundary condition at the liquid/mushy interface. The present results are compared with analytic solutions derived for the freeze coating of infinite dimensional plates and the discrepancy is found to be less than 0.5 percent in relative magnitude for all simulation cases. In addition the conservation of thermal energy is checked. The results show that the freeze coat grows proportional to the 1.2 square of axial position as predicted by analytic solutions ar first. But after the short period of initial growth, the growth rate of the freeze coat gradually decreases and finally the freeze coat starts to decay. The effects of various non-dimensional processing parameters on the behavior of freeze coat are also investigated.

Keywords

References

  1. Kuiken, H. K., 1977, Solidification of a Liquid on a Moving Sheet, Int. J. Heat Mass Transfer, Vol. 20, pp. 309-314 https://doi.org/10.1016/0017-9310(77)90151-X
  2. Levy, H. L. R. M., Lockyer, A. J. and Arridge, R. G. C., 1978, The Coating of Fibres, Int. J. Heat Mass Transfer, Vol. 21, pp. 435-443 https://doi.org/10.1016/0017-9310(78)90077-7
  3. Seeniraj, R. V. and Bose, T. K., 1981, Freeze-Coating on a Continuous Moving Sheet and on an Axially Moving Cylinder, Warme Stoffubertrag., Vol. 15, pp. 239-243 https://doi.org/10.1007/BF01003644
  4. Cheung, F. B., 1985, Analysis of Freeze Coating on a Nonisothermal Moving Plate by a Perturbation Method, J. Heat Transfer, Vol. 107, pp. 549-556
  5. Cheung, F. B. and Cha, S. W., 1987, Finite-Difference Analysis of Growth and Decay of a Freeze Coat on a Continuous Moving Cylinder, Numer. Heat Transfer, Vol. 12, pp. 41-56 https://doi.org/10.1080/10407788708913573
  6. Cheung, F. B., 1990, Solidification on a Chilled Continuous surface Moving in a Parallel Free Stream, J. Heat Transfer, Vol. 112, pp. 521-523
  7. Mahmoud, K. G., 1994, Numerical Analysis of Freeze Coating on a Two-Dimensional Moving Plate, Numer. Heat Transfer, Part A, Vol. 25, pp. 279-293 https://doi.org/10.1080/10407789408955949
  8. Rezaian, A. and Poulikakos, D., 1991, Heat and Fluid Flow Process during the Coating of a Moving Surface, AIAA J. Thermophys., Vol. 5, pp. 192-198
  9. Stevens, R. and Poulikakos, D., 1991, Freeze Coating of a Moving Substrate with a Binary Alloy, Numer. Heat Transfer, Vol. 20, pp. 409-432 https://doi.org/10.1080/10407789108944830
  10. Nam, J. H., Hong, H. and Kim, C.-J., 1999, Freeze Coating of a Cylindrical Object with a Binary Alloy, Heat Transfer - Asian Research, Vol. 28, pp. 239-254 https://doi.org/10.1002/(SICI)1523-1496(1999)28:4<239::AID-HTJ1>3.0.CO;2-9
  11. Worster, M. G., 1986, Solidification of an Alloy from a Cooled Boundary, J. Fluid Mech., Vol. 167, pp. 481-501 https://doi.org/10.1017/S0022112086002938