Ti(CN) coating on aluminum alloy formed by MO-PACVD

Al 합금에 MO-PACVD법으로 증착시킨 Ti(CN) 코팅 층의 물성에 관한 연구

  • ;
  • ;
  • J. Woehle (Fraunhofer Institut fuer Schicht-und Oberflaechentechnik) ;
  • K.-T. Rie (Institut fuer Oberflaechentechnik und Plasmatechnische Werkstoffentwicklung, TU Braunschweig)
  • 김태형 (현대전자(주)) ;
  • 김선규 (울산대학교 공과대학 재료금속공학부) ;
  • ;
  • Published : 2000.02.01

Abstract

A Ti(CN) layer was formed on aluminum alloy by using diethylamino titanium, hydrogen and nitrogen with the pulsed DC PACVD process. Effect of process parameters such as precursor evaporation temperature, duty ratio, frequency, voltage, $H_2$/$N_2$gas ratio on the properties of Ti(CN) layer were investigated. The layer thus obtained had high hardness and low friction coefficient. Detailed results on the hardness, surface morphology, XRD, WDS analysis, wear test and scratch test of this layer are presented.

Keywords

References

  1. J. Vac. Sci. Technol. v.4 no.6 H. Holleck
  2. 한국표면공학회지 v.29 no.4 김선규;유정광;이건환;권식철
  3. Proceedings of the 9th Int. Conf. on CVD N. Kikuchi;Y. Qosawa;A. Nashiyama
  4. Mater. Sci. Eng. v.A139 K. T. Rie;A. Gebauer
  5. Surf. Coatings Technol. v.59 K. T. Rie;J. Woehle;A. Gebauer
  6. Surf. Coatings Technol. v.94;95 S.K. Kim;T. Wierzchon;J. R. Sobiecki
  7. 대한금속학회지 v.37 no.7 류홍재;김선규
  8. Conf. Proc. ULSI-X C. Goldberg(et al.)
  9. Annu. Rev. Mater. Sci. v.7 J. A. Thornton
  10. J. Vac. Sci. Technol. v.A4 no.5 J. E Sundgren;Ⅱ. T. G. Hentzell
  11. Thin Solid Film v.130 A. Gittis;D. Dobrev
  12. Mater. Sci. Eng. v.A140 J. Michalski;T. Wierzchon
  13. AEPSE'97Conf. Plasma-CVD of Ti(CN) or ZrCN film on light metal K. T. Rie;J. Whle
  14. 포항공대 박사학위 논문 윤주영