길이 측정 센서를 이용한 병렬기구의 기하학적 오차 보정

Calibration of Geometric Errors of a Parallel Manipulator Using a Sensor of Length Measurement

  • 최우천 (고려대학교 기계공학과) ;
  • 임현규 (고려대학교 기계공학과 대학원)
  • Choi, Woo-Chun (Dept.of Mechanical Engineering, Korea University) ;
  • Lim, Hyun-Kyu (Graduate Student, Department of Mechanical Engineering, Korea University)
  • 발행 : 2000.11.01

초록

This paper proposes a method of geometric error calibration for a parallel using only sensor of length measurement without additional sensors. The concept is generalized which creates measurement residuals by exploring conflicting information provided with external length sensing. Although this calibration method requires many configurations, it has an advantage of using relatively simple length measurements. This method is shown to provide good calibration results, especially when there exist smaller measurement noises and more configurations are measured.

키워드

참고문헌

  1. H. Zhuang, J. Yan, and O. Masory, 'Calibration of Stewart Platforms and Other Parallel Manipulators by Minimizing Inverse Kinematic Residuals,' Journal of Robotic Systems, Vol. 15, No. 7, pp. 395-405, 1998 https://doi.org/10.1002/(SICI)1097-4563(199807)15:7<395::AID-ROB2>3.0.CO;2-H
  2. J. Wang, and O. Masory, 'On the Accuracy of a Stewart Platform - Part II The Effect of Manufacturing Tolerances,' Proceed. IEEE Int. Conf. on Robot. Automat., pp. 725-731, 1993
  3. H. Zhuang, Z. S. Roth, 'Camera-Aided Robot Calibration,' CRC press, 1996
  4. D. Bennet and J. M. Hollerbach, 'Autonomous calibration of single loop closed kinematic chains formed by manipulators with passive endpoint constraints,' IEEE Trans. Robot. Automat., Vol. 7, pp. 597-606, 1991 https://doi.org/10.1109/70.97871
  5. 김봉진, 최용제, '스튜어트 플랫폼형 공작기계의 기구학적 보정에 관한 연구', 대한기계학회 1999 춘계학술대회논문집 A, pp. 128-133, 1999
  6. 전진철, 이선규, '6-PRRS 병렬형 기계의 오차해석 및 교정에 관한 연구', 한국정밀공학회 1999 추계학술대회논문집 I, pp. 239-242, 1999
  7. H. Zhuang, 'Self-Calibration of Parallel Mechanism with a Case Study on Stewart Platforms,' IEEE Trans. Robot. Automat., Vol. 13 , No. 3, pp. 387-397, 1997 https://doi.org/10.1109/70.585901
  8. H. Zhuang, L. Liu, 'Self-Calibration of Parallel manipulators,' IEEE Trans. Int. Conf. Robot. and Automat., pp. 994-999, Apr., 1996
  9. M. G. Mohamed and J. Duffy, 'A Direct Determination of the Instantaneous Kinematics of Fully Parallel Robot Manipulators,' Trans. of the ASME , Vol. 107, 1985
  10. K. Sugimoto, 'Kinematic and Dynamic Analysis of Parallel Manipulators by Means of Motor Algebra,' J. of Mech. Trans. Automat. in Design, Vol. 109, No. 3, 1987