참고문헌
- Malkin, S., Grinding Technology: Theory and Application of Machining with Abrasives, John Wiley & Sons, pp. 197-221, 1988
- Brinksmeier, E. and Werner, F., 'Monitoring of Grinding Wheel Wear,' Annals of the CIRP, Vol. 41, No. 1, pp. 373-376, 1992
- Blunt, L. and Ebdon, S., 'The Application of Three-dimensional Surface Measurement Techniques to Charaterizing Grinding Wheel Topography,' Int. J. Mach. Tools Manufact. Vol. 36, No. 11, pp. 1207-1226, 1996 https://doi.org/10.1016/0890-6955(96)00041-7
- Gotou, E. and Touge, M., 'Monitoring of Wear of Abrasive Grains,' Journal of Materials Processing Technology, Vol. 62, pp. 408-414, 1996 https://doi.org/10.1016/S0924-0136(96)02444-2
- 垣野義昭, 松原厚, 山路伊和夫, 松田健嗣, 中用平三郞, 廣垣俟樹, 嘗田義宏, '砥石作業面トポグラフィのオン.ザ.マシン計測に關する硏究(第1報) : レ一ザスタイラスを用いた計測システムの開發,' 精密工學會誌, vol. 63, No. 2, 1997
- 홍성욱, 남경모, 김현수, '연삭 숫돌 직경 및 회전오차의 비접촉 측정 방법,' 한국정밀공학회지, vol. 12, No. 13, pp. 175-181, 1995
- 김현수, 홍성욱, '기상에서의 표면 거칠기 측정에 의한 연삭 공정 모니터링,' 한국정밀공학회지, Vol. 16, No. 1, pp. 167-173, 1999
- 주광훈, 김현수, 홍성욱, 박천홍, '평면 연삭에서의 연삭 숫돌 마모 모니터링,' 한국정밀공학회 춘계학술대회, 부산대학교, 2000
- 김선호, 안중환, '연삭 가공에 있어 비가공 시간 단축에 관한 연구,' 한국정밀공학회지, Vol. 14, No. 8, pp. 101-107, 1997
-
Babu, N. R. and Radhakrishnan, V., 'Influence of Dressing Feed on The Performance of Laser Dressed
#Al_2O_3$ Wheel in Wet Grinding,' Int. J. Mach. Tools Manufact., Vol. 35, No. 5, pp. 661-671, 1995 https://doi.org/10.1016/0890-6955(95)93036-6 - 後藤英, 峠睦, 大?慶史, '砥粒摩耗のインプロセス測定(第3報) : 濕式條件下で取り?まわた畵像の評?,' 精密工學會誌, Vol. 62, No. 9, 1996