Tensile Properties of Thixoformed Semi-solid A356 Alloy

반용융 성형된 반응고 A356 합금의 인장 특성

  • Yu, Yeong-Bin (Research Center for Aircraft Parts Technology, Gyeongsang National University) ;
  • Song, Pal-Yong (Research Center for Aircraft Parts Technology, Gyeongsang National University) ;
  • Kim, Sang-Sik (Research Center for Aircraft Parts Technology, Gyeongsang National University) ;
  • Lee, Jae-Hyeon (Department of Metallurgy and Materials Science, Changwon National University) ;
  • Lee, Myeong-Ho (Korea Automotive Technology Institute)
  • 유영빈 (경상대학교 재료공학부, 항공기부품기술연구센터) ;
  • 송팔용 (경상대학교 재료공학부, 항공기부품기술연구센터) ;
  • 김상식 (경상대학교 재료공학부, 항공기부품기술연구센터) ;
  • 이재현 (창원대학교 금속재료공학과) ;
  • 이명호 (자동차부품연구원 경량소재실)
  • Published : 2000.01.01

Abstract

Despite the improved formability and processing advantages, the use of semi-solid metals is greatly limited due to the difficulties in controlling the optimum forming parameters. In the present study, the tensile properties of closed die, pressure formed semi-solid A356 alloy were examined. It was demonstrated that the tensile strength of thixoformed A356 alloy could be greatly reduced when the forming parameters were not rigorously controlled. The reduced strength of unappropriately formed products appeared to be related to the coarsening of the primary phases. The possibility of improving tensile properties of as-formed products by simple post heat treatment was also assessed.

반응고 금속의 반응용 성형법은 그 우수한 성형성으로 생산공정에 있어 주조나 단조와 같은 일반 성형법에 비해 많은 장점을 가지고 있는 반면, 정밀한 공정 변수 제어가 요구되므로 실용화에 있어 크게 제한 받고 있다. 본 연구에서는 반응고 금속인 A356합금을 사용하여 밀폐형 가압 성형 전후의 기계적 특성의 변화를 관찰하여, 가압 성형시의 정확한 공정 변수 제어가 이루어지지 않았을 경우에 일어날 수 있는 기계적 특성의 감소 원인이 가압 성형에 의한 미세조직의 응집과 조대화에 있음을 미세조직과 파단면 관찰을 통하여 규명하였다. 또한 가압 성형 후 본 연구에서 \`반응고 열처리\`라 명명한 후 처리 공정을 적용하여 인장 특성을 향상시킬수 있었다.

Keywords

References

  1. International Conference on Semi-solid Processing of Alloys and Composites(4th ed.) D.H. Kirkwood(ed.);P. Kapranos(ed.)
  2. Symposium of Semisolid Forming Technology(Ⅰ) Korean Institute of Metals
  3. Symposium of Semisolid Forming Technology(Ⅱ) Korean Institute of Metals
  4. Juno v.12 D.H. Kim;Y.S. Han;H.I. Lee
  5. Jujo v.18 H.K. Jung;C.G. Kang
  6. Advanced Materials & Processes v.1 S.B. Brown;M.C. Flemings
  7. Casting Tech. no.jan. D. G. Kirkwood;P. Kapranos
  8. International Conference on Semi-solid Processing of Alloys and Composites(4th ed.) G. Chiarmetta
  9. Jujo v.17 J.P. Eom;D.H. Jang;S.G. Lim;D.G. Kim;D.E. Yoon