Abstract
The GIUH (Geomorphologic Instantaneous Unit Hydrograph) is to be applied to the ungauged or insufficiently gauged basins. For tIris purpose, an accurate estimation of the charactenstlc velocity is one very important part, but any proper method for this has not been developed yet. In case that we have enough rainfall and runoff clata, the estimation of the characteristic velocity may be an easy job, but it is out of the purpose of the GIUH. Remindmg that the purpose of GIUH the characterisbc veloclty should be estimated based on the geomorpholog1c analysis and also be snnple for easy apphcation. In tIris research analysis cmd application of the GruH was given to several sub-basins in Wi-stream river basin, Gono, Donggok and Hyoryung. After deriving the characteristic velocity througn a optimizatlOn process with real data, it is compared w1th several velOCIties der1ved from geOlnoI1Jhoclimatic instantaneous unit hydrograph theory and several other concentration time formulae. The estimated charactenstic velocities using Kerby, Kim, KInematic Wave, and Brasby- Williams formulae found to g1ve the appropriate results. Hmvever, as the Kerby, and the Kinematic Wave require user's decision of the IvIanning's n value, the K1m and the Braby-Williams seem to be more applicable and recommended as characteristic velocity formula.
지형형태학적 순간단위도(GIUH)는 미계측유역이나 관측자료가 충분하지 않은 유역의 적용을 목적으로 한다. 이를 위해서는 GIUH의 동역학적 매개변수인 특성속도의 정도 있는 추정이 가장 중요한 요소이나 아직까지 그에 대한 정확한 산정방법은 개발되어 있지 못한 실정이다. 실측된 강우 유출자료가 존재할 경우, 특성속도의 추정은 상대적으로 용이하나. GIUH의 목적에 맞지 않는다. 이 미계측 유역에 대한 유출 해석임을 상기한다면 특성속도 역시 지형형태학적인 해석을 바탕으로 산정되어야 하고, 그와 더불어 실제 적용에 합리적이며 간편한 식의 구조로 표현되어야 한다. 이에 본 연구에서는 GIUH 이론을 위천의 고노, 통곡, 효령 유역에 적용하고, 실측 자료를 근거로 한 최적화 과정을 통하여 특성속도를 산정하였다. 그렇게 구한 특성속도는 GcIUH 및 기타 집중시간에 관한 경험공식과의 비교를 통해 가장 적절한 방법을 선정할 수 있도록 하였다. 비교 결과 Kerby, 김남원, Kinematic Wave, Brasby-Williams 공식 등이 비교적 실측치와 근사한 값을 주는 것으로 조사되었으나, Kerby, Kinematic Wave 공식 등의 경우 조도계수 n값이 다소 주관적으로 추정될 수 있으며, 또한 특성속도가 이들 계수에 따라 크게 변화하는 단점이 있는 것으로 나타났다. 따라서, 비교적 정확하고도 객관적인 값을 주는 김남원 및 Brasby-Williams공식을 유역의 특성속도 산정공식으로 제시할 수 있을 것으로 보인다.