참고문헌
- Int. J. Mech. Sci. v.36 Rigid-plastic finite element anaylsis of sheet metal forming processes using continuous contact treatment and membrane element incorporating bending effect D. J. Yoo;I. S. Song;D.Y. Yang;J. H. Lee
- J. Mater. Process. Technol. v.45 Numerical simulations of wall wrinkling in food can drawing J. Proubet
- J. Jpn. Soc. Technol. Plast. v.25 Fracture mechanism and fracture control in deep drawing with hydraulic counter pressure. studies on hydraulic counter pressure forming I- K. Nakamura;T. Nakagawa
- J. Mater. Process. Technol. v.28 An experimental investigation into the stamping of elastic-plastic circular plates L. C. Zhang;T. X. Yu
- J. Appl. Mech. v.25 Buckling of a thin annular plate under uniform compression N. Yamaki
- Int. J. Mech. Sci v.24 The buckling of annular plates in relation to the deep drawing process T. X. Yu;W. Johnson
- Int. J. Mech. Sci. v.30 Onset and growth of wrinkling in thin square plate subjected to diagonal tension Y. Tomita;A. Shindo
- J. Jpn. Soc. Techn. Plasticity v.24 Purpose and feature of Yoshida buckling test(YBT) K. Yoshida
- I. J. Plasticity v.9 Postbifurcation behavior of wrinkles in square metal sheet under Yoshida test X. Wang;Lawrence H. N. Lee
- Int. J. Solids Structures v.15 An incremental approach to the solution of snapping and buckling problems E. Ricks
- Comp. & Struct. v.53 Finite element analysis of lateral buckling for beam structures H. S. Lee;D. W. Jung;J.-H. Jeong;S. Im
- Ph. D. Thesis Continuum-based shell elements G. Stanley
- Finite element procedures in engineering analysis K. J. Bathe
- The finite element method T. J. R. Hughes
- Comput. Meths. Appl. Mech. Engrg. v.174 A elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials J. W. Yoon;D. Y. Yang;K. Chung
- Int. J. Plasticity v.9 A deformation theory of plasticity based on minimum plastic work K. Chung;O. Richmond
- Proc. Roy. Soc. London v.A193 A theory of the yielding and plastic flow of anisotropic metals R. Hill
- Theory of Elastic Stability Theory of Elastic Stability S. P.Timoshenko
- Proceedings of NUMIFORM' 95 Optimization of sheet metal forming processes by instability analysis J. Cao;M. C. Boyce