한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제9권5호
  • /
  • Pages.157-164
  • /
  • 2000
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

AE 신호의 주파수분석에 의한 Chatter 진동의 감시

Monitoring of Chatter Vibration by Frequency Analysis of AE Signals

  • 발행 : 2000.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A machine tool generally has some serious stability problems in the form of tool chatter during the cutting process. Chatter vibration deteriorates the surface finish, reduce tool and machine life, accelerates machine tool system component wear, and may lead to an unacceptable noise sound in the working environment. In this study, the behavior of spectral density of AE signal and principal cutting force signal in order to monitor the chatter vibration in the cutting process has been investigated. From the results, the reliability of proposed monitoring method has been confirmed.

키워드

참고문헌

  1. 한국공작기계학회 v.4 no.2 선삭가공에서 공구마멸에 따른 절삭저항과 AE 신호의 특성 연구 맹민재;정준기
  2. 한국공작기계학회 v.7 no.6 절삭조건과 AE 신화들과의 관계에 관한 실험적 연구 원종식;조종래;정윤교
  3. ASME;Journal of Engineering Materials and Technology v.106 In-process Tool Fracture Detection M. S. Lan;D. A. Dornfeld
  4. Trans. ASME, J. Eng. Ind. On the art of the Cutting Metals F. W. Taylor
  5. ASME v.114 Use of Audio Signals for Chatter Detection and Control T. Delio;J. Iusty;S. Smith
  6. 한국공작기계학회 v.6 no.4 음압신호와 안정도제어법을 이용한 선삭작업에서의 채터감식 및 제어 이성열;정성종
  7. Trans. ASME, J. Ind. v.102 A Feasibility Study of Online Identification of Chatter in Turning Operations K. Emam;S. M. Wu
  8. Trans. ASME, J. Ing. v.105 Chatter vibration of Lathe Tools : Part 1 : General Characteristics of chatter vibration E. Marui;S. Ema;S. Kato
  9. Int. J. Mach. Tools Manuf. v.29 The Development of Frequency and Amplitude of chatter vibration K.Jemielniak;A.Widota
  10. Int. J. Mech. Sci. v.22 Acoustic Emission during Orthogonal Cutting D. A. Dornfeld