The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

A Study on the Efficient Finite Element Technique using Geometrical Symmetry

형상의 대칭성을 이용한 효율적인 3차원 유한요소 해석 기법에 관한 연구

  • Published : 2000.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

In general, when geometry and current distribution have a periodic or symmetric property, the analysis of a part model is sufficient to represent that of a whole model by using the periodic boundary condition. It is impossible, however, to apply the periodic boundary condition when the current distribution is not symmetric even if the geometry of the model is symmetric. In this paper, a novel technique to resolve this problem is proposed. Even when the geometry is symmetric and the current distribution is not, the proposed method enables that calculation time for a whole model is reduced to that for a part model. The proposed method is applied to a deflection yoke (DY), and validness and efficiency of the method are verified.

Keywords

References

  1. Sergio Pissanetzky, Youqing Xiang, 'The Extended Two-Scalar-Potentials Formulation of 3-D Nonlinear Magnetostatics', COMPEL, Vol. 9, Sup.A., pp.21-24, 1990
  2. K. Weeber, S. Ratnajeevan, H. Hoole, 'The Subregion Method in Magnetic Field Analysis and Design Optimization', IEEE Trans. Magnetics, Vol.28, No.2, pp. 1561-1564, MARCH, 1992 https://doi.org/10.1109/20.123996
  3. 이홍배, 변 요소를 이용한 3차원 정자장 해석, 서울대학교 공학석사 학위논문. 1991년
  4. 홍기란, 김근환, 최마영, 고창섭, 한송엽, 정현교, '민감도 해석을 이용한 자기편향 코일의 설계', 대한전기학회논문지, 41권, 2호, pp. 118-124, 1992년
  5. Y. Kawase, T. Mori, K Hirata, Y. Mitsutake, 'Performance Analysis of Electromagnetic ID Transmission System Using 3-D Finite Element Method', IEEE Trans. Magnetics, Vol. 34, No. 5, SEPTEMBER, 1998 https://doi.org/10.1109/20.717752
  6. O.A. Mohammed, Magnetic Vector Potential Based Formulation and Computation of Nonlinear Three Dimensional Magnetostatic Fields and Force in Electrical Devices by Finite Elements, Ph. D. Thesis, Virginia Politechnic Institute and State University, 1983
  7. Chang-Hwan Im, Hong-Kyu Kim, Hyun-Kyo Jung, 'Efficient Technique for 3-D Edge Element Method Considering Geometrical Symmetry', Proceeding of IEEE CEFC'2000(Milwaukee, USA), pp 189, JUN. 2000