대한전기학회논문지:전기물성ㆍ응용부문C (The Transactions of the Korean Institute of Electrical Engineers C)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

Solenoid 형태의 소형.고성능 RF Chip 인덕터에 대한 연구

A Study of Micro, High-Performance Solenoid-Type RF Chip Inductor

  • 발행 : 2000.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this work, small-size, high-performance simple solenoid-type RF chip inductors utilizing an Al2O3 core material were investigated. Copper (Cu) wire with $40\mum$ diameter was used as the coils and the size of the chip inductor fabricated in this work was $2.1mm\times1.5mm\times1.0mm$. The external current source was applied after bonding Cu coil leads to gold pads electro-plated on each end of backsides of a core material. High frequency characteristics of the inductance (L), quality factor (Q), and impedance (Z) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). This HP4291B was also used to obtain the equivalent circuit and its circuit parameters of the chip inductors. This HP4291B was also used to obtain the equivalent circuit and its circuit parameters of the chip inductors. The developed inductors have the self-resonant frequency (SRF) of 1.1 to 3.1 GHz and exhibit L of 22 to 150 nH. The L of the inductors decreases with increasing the SRF. The Z of the inductors has the maximum value at the SRF and the inductors have the quality factor of 70 to 97 in the frequency range of 500 MHz to 1.5 GHz.

키워드

참고문헌

  1. Takanori Tsutaoka, Teruhiro Kasagi, Kenichi Hatakeyama, 'Magnetic Field Effect on the Complex Permeability for a Mn-Zn Ferrite and its Composite Materials,' Journal of the European Ceramic Society, pp. 1531-1535, 1999 https://doi.org/10.1016/S0955-2219(98)00474-9
  2. Rob Groves, David L. Harame, Dale Jadus, 'Temperature Dependence of Q and Inductance in Spiral Inductors Fabricated in a Silicon-Germanium/BiCMOS Technology,' IEEE Journal of Solid-State Circuits, vol. 32, no. 9, pp. 1455-1459, Sep. 1997 https://doi.org/10.1109/4.628763
  3. I. Wolff and H. Kapusta, 'Modeling of Circular Spiral Inductors for MMICs,' IEEE MTT-s Digest, pp. 123-126, 1987
  4. Y. Kobayashi, S. Ishibashi, K. Shirakawa, J. Toriu, H. Matsuki, K. Murakami, 'New Type Micro Cloth-Inductor and Transformer with Thin Amorphous Wires and Multi-Thin Coils,' IEEE Trans. on Magnetics, vol. 28, no. 5, pp. 3012-3014, Sep, 1992 https://doi.org/10.1109/20.179701
  5. C. Patrick Yue, S. Simon Wong, 'On-Chip Spiral Inductors with Patterned Ground Shields for Si-Based RF IC's,' IEEE Journal of Solid-State Circuits, vol. 33, no. 5, pp. 743-752, May 1998 https://doi.org/10.1109/4.668989
  6. Jun-Bo Yoon, Chul-Hi Han, Eui-Sik Yoon and Choong-Ki Kim, 'Monolithic Fabrication of Electroplated Solenoid Inductors Using Three-Dimension Photolithography of a Thick Photoresist,' Jpn. J. Appl. Phys. Vol. 37, pp. 7081-7085, Part1, No. 12B, Dec 1998
  7. W. H. Hayt Jr., 'Engineering electromagnetics,' 5th ed. New York : McGraw-Hill, 1989
  8. R. F. Soohoo, 'Magnetic Thin Film Inductors for Integrated Circuit Applications,' IEEE Trans. on Magnetics, vol. MAG -15, 1803, 1979
  9. Chong H. Ahn, Mark G. Allen, 'A New Toroidal-Meander Type Integrated Inductor With A Multilevel Meander Magnetic Core,' IEEE Trans. on Magnetics, vol. 30, no. 1, pp. 73-79, Jan, 1994 https://doi.org/10.1109/20.272517
  10. Chong H. Ahn, Mark G. Allen, 'Micromachined Planar Inductors on Silicon Wafers for MEMS Applications,' IEEE Trans. on Industrial Electronics, vol. 45, no. 6, pp. 866-876, Dec, 1998 https://doi.org/10.1109/41.735330
  11. K. Shirakawa, K. Yamaguchi, M. Hirata, T. Yamaoka, F. Takeda, K. Murakami, and H. Matsuki, 'Thin Film Cloth-Structured Inductor for Magnetic Integrated Circuit,' IEEE Trans. on Magnetics, pp. 2262-2264, 1990 https://doi.org/10.1109/20.104692
  12. H. Matsuki, N. Fujii, K. Shirakawa, J. Toriu, K. Murakami, 'Magnetic-Multi-Turn Planar Coil Inductor,' IEEE Trans. on Magnetics, vol. 27, no. 6, pp. 5438-5440, Nov, 1991 https://doi.org/10.1109/20.278864