Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis and Design of a Motor Driven Tilt/Telescopic Steering Column for Safety Improvement

안전도를 고려한 전동 틸트/텔레스코픽 조향주의 해석 및 설계

  • Published : 2000.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The design process of the motor driven tilt/telescopic steering column is established by axiomatic design approach in conceptual design stage. By selecting independent design variables for improvin g performance of the steering system, each detailed design can be carried out independently. In the detailed design, the safety in crash environment and vibration reduction are considered. An occupant analysis code SAFE(Safety Analysis For occupant crash Environment) is utilized to simulate the body block test. Segments, contact ellipsoids and spring-damper elements are used to model the steering column in SAFE. The model is verified by the result of the body block test. After the model is validated, the energy absorbing components are designed using an orthogonal array. Occupant analyses are performed for the cases of the orthogonal array. Final design is determined for the minimum occupant injury. For vibrational analysis, a finite element model of the steering column is defined for the modal analysis. The model is validated by the vibration experiment. Size and shape variables are selected for the optimization process. An optimization is conducted to minimize the weight subjected to various constraints.

Keywords

References

  1. N. P. Suh, 1990, 'The Principles of Design,' The Oxford University Press
  2. 김우승, 1997, '전동 스티어링 컬럼,' 대한기계학회지, 제37권 10호, p. 82
  3. Shyu, S., Mani, A., Krishnaswamy, P., Conroy, R., Shermetaro, M., and Exner, G., 'Designing Energy Absorbing Steering Wheels Through Finite Element Impact Simulation,' SAE paper No. 931844
  4. Park, Y. S., Lee, J. Y., Lim, J. M. and Park, G. J., 1996, 'Optimum design of a steering column to minimize the injury of a passenger,' International Journal of Vehicle Design, Vol. 17, No. 4, pp. 398-414
  5. 김희수, 최양욱, 1996, '신차개발과정에서 충돌해석의 역할,' 대한기계학회지, 제36권, 제9호, pp. 867-875
  6. 조병관, 류길하, 강홍대, 1995, '상용차 조향계 의 진동 해석,' 자동차공학회논문집 제3권, 제2호, pp. 86-94
  7. 임재문, 1997, '차량충돌시 승객거동해석을 위한 소프트웨어의 개발 및 관련 부품의 설계방안 제시,' 한양대학교 박사학위 청구논문
  8. Obergefell, L. A., Gardner, T. R., Kaleps, I. and Fleck, J. T., 1988, 'Articulated Total Body Model Enhancements,' Report No. AAMRL-TR-88-043
  9. 박경진, 임재문, 최우석, 한선규, 전원기, 1997, '충돌안전도규정(FMVSS 203)을 만족하기 위한 에너지흡수 조향계의 해석 및 설계,' (주)삼성전기 최종보고서
  10. 임재문, 한선규, 전원기, 우덕현, 박경진, 1997, '직교배열표를 이용한 에너지 흡수 조향계의 해석 및 설계,' 한국자동차공학회 춘계학술대 회 Vol. 2, pp. 401-406
  11. 이권희, 1996, '연속 및 이산 설계공간에서의 구조물에 대한 강건최적설계, '한양대학교 박사 학위 청구논문
  12. 박영선, 이주영, 박경진, 1995, '직교배열표를 이용한 승용차의 에어백의 설계,' 자동차공학회 논문집, 제3권, 제2호, pp. 62-76
  13. Wang, J. T. and Lin, K. H, 'A Cal3d Steering System Impact Model,' SAE Paper No. 880650
  14. GENESIS User's manual, VMA Engineering, 1997
  15. 49CFR, Part 571, FMVSS 203, 'Impact Protection for the Driver from the Steering Control System,' DOT, NHTSA, USA
  16. ' 자동차 안전기준 시행 세칙 ', 건설교통부, 1993
  17. Horsch, J. D., Viano, D. C. and Decou, J., 'History of Safety Research and Development on the General Motors Energy-Absorbing Steering System,' SAE paper No. 912890
  18. Phadke, M. S., 1989, 'Quality Engineering Using Robust Design,' Prentice Hall
  19. 박성현, 1991, '현대실험계획법', 민영사
  20. Gillespie, T. D., 1992, 'Fundamentals of Vehicle Dynamics,' SAE
  21. Vries, A., Wagner, M., 'The Brake Judder Phenomenon,' SAE paper, No. 920554
  22. Petyt, M., 1990, 'Introduction to Finite Element Vibration Analysis,' Cambridge University Press, Boston
  23. Todd Schiller and Tatsuo Osawa, ' Incopotation of Analytical simulations into the NVH Design and Development Process of the Nissan Quest,' SAE Paper No. 922121
  24. Gi Seob Jeong, Jin Kwan Suh, and Seung Gyeon Jung, 1996, ' Validation of FE Models for NVH Simulation,' Proceedings of the 14th International Modal Analysis Conference, pp 1265-1271
  25. Arora, J. S., 1989, 'Introduction to Optimum Design,' McGraw-Hill book Company, New York
  26. Garret N. Vanderplaats, 1984, ' Numelcal Optimization Techniques for Engineering design,' McGraw-Hill Book Company