한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)
- 제16권4호통권97호
- /
- Pages.163-177
- /
- 1999
- /
- 1225-9071(pISSN)
- /
- 2287-8769(eISSN)
곡면금형 연마를 위한 머시닝센터 장착형 연마로봇 시스템 개발에 관한 연구
A Study on the Development of Polishing Robot System Attached to Machining Center for Curved Surface Die
- 발행 : 1999.04.01
초록
Polishing work for a curved surface die demands simple and repetitive operations and requires much time while it demands also high precision. Therefore it is operated by a skilled worker in handiwork. However the workers avoid gradually a polishing work because of the poor environmental conditions such as dust and noise. In order to reduce the polishing time and to alleviate the problem of shortage of skilled workers, an automatic polishing robot system which is composed of a polishing robot with two degrees of freedom motion and pneumatic system is developed, and it is attached to machining center with three degrees of freedom. The system keeps the polishing tool vertically on the surface of die and maintains constant pneumatic pressure. The polishing robot with DSP(digital signal processor) controller is controlled by sliding mode control. A synchronization between machining center and polishing robot is accomplished by using M code of machining center. A performance experiment for polishing work is executed by the developed automatic polishing robot system. The result shows that the developed automatic polishing robot has a good performance and well polished workpiece surface is obtained.
키워드