Electronic Circuit System of a Portable Rl Gauge for Compaction Control

성토다짐용 휴대용 Rl 계기의 전자회로 시스템

  • 김기준 (시립인천전문대학 제어계측학과)
  • Published : 1999.06.01

Abstract

In this study, an objection is to develop a electronic circuit of a gauage using radioisotope for compaction control to be needed at public works The developed gauage makes use of radioisotope with the activity exempted from domestic atomic law and consists of measuring circuits for gamma-rays and thermal neutrons, a high voltage supply unit and a microprocessor. To obtain meaningful numbers of pulse counts, parallel five and tow circuits are provided for gamma-rays and thermal neutrons, respectively. Also, to minimize effects of natural environmental radiation and electrical noise, circuits are electrostatically shielded and pulses made by ripples are eliminated by taking frequency of high voltage supplied to the circuit and pulse height of ripples into consideration One-chip microprocessor is applied to process various counts, results are stored, Enough and meaningful numbers of pulses are counted with the prototype gauage for compaction control.

본 연구에서는 토목공사에서 필요한 성토시공관리용 방사성 동위원소 이용계기의 전자회로를 개발하고자 하였다. 제작된 계기는 국내 원자력법에서 제한하는 세기 이하의 밀봉선원을 사용하며, 감마선과 열중성자 검출회로, 고전압 공급장치 그리고 마이크로프로세서 등으로 구성하였다. 성토의 밀도측정에 충분한 계측수를 얻기 위하여 감마선 검출은 5개의 회로로, 열중성자 검출은 2개의 회로로 구성하였으며, 또한, 모든 회로는 자연 방사선과 잡음에 의한 영향을 최소화하기 위하여 정전차폐하였으며, 계수관에 인가하는 고전압의 리플 진폭과 주파수를 고려하여 펄스 계수시에 리플 성분에 의한 펄스수는 제거하였다. 방사선의계수 및 연산처리에는 원칩 마이크로프로세서를 이용하였으며, 계측결과는 메모리장치에 저장되었다. 시제작한 RI계기의 검출성능을 평가한 결과 성토의 밀도측정에 충분한 계측수를 얻을 수 있음이 확인되었다.

Keywords